Fluke Networks MicroScanner™ PoE Cable Verifier Kit

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 134.37ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • Ecom TUTT24 Fluke Networks MS-PoE Kit
  • Fluke Networks Microscanner™ PoE Cable Verifier Kit
  • Fluke Networks Microscanner™ PoE Cable Verifier Kit
  • Fluke Networks Microscanner™ PoE Cable Verifier Kit
  • Fluke Networks Microscanner™ PoE Cable Verifier Kit

Key features

  • Reports PoE class (0-8), injector voltage, switch speed up to 10G
  • Shows wire map, length, cable ID, and distance to fault
  • Trace cable or wire pairs with included IntelliTone™ Pro 200 probe
  • Includes Remote IDs to determine network layout quickly

Sale ends soon.

Shop now!

DAYS
HR
MIN
SEC
In stock
A$2833.60
Tax included where applicable
Genuine Fluke Product
Free shipping

Product overview: Fluke Networks MicroScanner™ PoE Cable Verifier Kit

The MicroScanner PoE Cable Verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks. It performs continuity tests on all wires in a few seconds and displays the results graphically, so you can see opens, shorts, and crossed wires.

The MicroScanner PoE helps make installation, maintenance, and troubleshooting on IT, security, PoE lighting, Ethernet-based HVAC devices, and IP-based building automation systems easier. Its oversized, backlit LCD screen displays clear results in any light or complete dark with intuitive icons and support of Class 0 to 8 PoE.
 

What's in the box:

  • MicroScanner PoE unit
  • Remote IDs
  • IntelliTone Pro 200 probe
  • Adapters
  • Commonly used accessories
  • Deluxe duffel bag

Specifications: Fluke Networks MicroScanner™ PoE Cable Verifier Kit

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental specifications
Operating temperature32 °F to 113 °F (0 °C to 45 °C)
Storage temperature-4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation)90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and VibrationRandom, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
SafetyIEC 61010-1 3rd Edition
Altitude4,000 m; Storage: 12,000 m
EMCIEC 61326-1
General specifications
Test connectorsShielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. 
PowerBattery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached)3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner™ PoE: 10.6 oz (300 g)
DisplayMonochrome LCD with backlight
Test modes
Cable testMeasures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner™ PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
ToneGenerates Intellitone™ and normal analog toning signals
PoEMicroScanner™ PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices
Performance specifications
Cable types testedTwisted pair: UTP, FTP, SSTP
Length testRange: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner™2). Can determine actual NVP with known length of cable.
Wiremap testDetects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detectionMicroScanner™ PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Tone generatorSupports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Models: Fluke Networks MicroScanner™ PoE Cable Verifier Kit

MS-POE-KIT
MicroScanner™ POE (Power Over Ethernet) Kit

Find a distributor
Includes:
  • MicroScanner™ POE (Power over Ethernet) cable verifier with detachable wiremap adapter
  • Remote identifiers #2-7
  • IntelliTone Pro 200 Probe
  • RJ45 cord and adapters
  • Magnetic strap
  • Deluxe duffle bag
  • Test kit pouch
  • (2) AA and (1) 9V alkaline batteries
  • Getting started guide (10 languages)
  • One year warranty on testers
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 142.95ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 27.97ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.