Fluke 190-102/S ScopeMeter® Test Tool

Fluke 190-102/S ScopeMeter® Test Tool is rated 3.4 out of 5 by 8.

Discontinued

Key features

See More, Fix More with the Two-Channel CAT IV Rated Fluke ScopeMeter® 190-102/S

The Fluke ScopeMeter 190-102/S combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.

The ScopeMeter 190-102/S is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

Two electrically isolated inputs
CAT III 1000 V / CAT IV 600 V safety rated
100 MHz bandwidth model
1.25 GS/s
Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
Dedicated 5000 Count digital multimeter in 2-channel models
Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
ScopeRecord roll mode, capture waveform sample data for up to 48 hours
TrendPlot, trend measurement readings for up to 22 days
Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
IP-51 rated for dust and drip proof to withstand harsh environments
Isolated USB ports for memory devices and PC connectivity
Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
Charge spare battery using optional external battery charger (EBC290)
Easy-access battery door to make it easy to swap batteries
A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Download the product manual Download the data sheet

This product is discontinued or reclassified

Fluke suggests:Fluke 190 Series III ScopeMeter® Test Tools

Get a free demo

Product overview: Fluke 190-102/S ScopeMeter® Test Tool

Fluke 190-102/S – 20 years of ScopeMeter® Test Tool Innovation

As the first two-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, the Fluke ScopeMeter 190-102/S combines an unprecedented level of performance, ruggedness, and portability with 100 MHz bandwidth and real-time sampling rates up to 1.25 GS/s and 200 ps resolution to capture noise and other disturbances. This model features deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The Fluke ScopeMeter 190-102/S portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000 V/CAT IV 600 V environments.

Three-dimensional testing for industrial systems

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

Circuit voltage/current overloading
Signal timing measurements and synchronization issues
Attenuation/input impedance mismatch
Signal fluctuation/drift

Three-phase testing for diagnosing VSD, power inverters, and converters

Test for harmonics, transients and loads at the three-phase power input
Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the harshest conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants ensuring reliable accurate performance every time you need them.

Built in multimeter to quickly and conveniently perform precise measurements

Built-in digital multimeter 2-channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include VDC, VAC, VAC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.

Capture and Share Waveforms Easily with New USB connectivity

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

See a Stable Display Instantly with Connect-and-View&trade Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)

Stores events like motion profiles, UPS, power supply, and motor start-ups
With the Stop-on-Trigger mode, the ScopeMeter 190-102/S automatically recognizes a power failure and stores the waveform data preceding it
With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles

Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

Plotting minimum and maximum peak values and average over time up to 22 days
Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults

Tektronix THS3000 Handheld Oscilloscope

The Tektronix THS3000 Handheld Oscilloscope has been discontinued, but customers can find a nearly identical replacement with the Fluke 190 ScopeMeter® Test Tool.

See how the models compare:

	THS3000	Fluke 190 ScopeMeter	Feature / Capability Differences
Platform	The Tektronix THS 3000 and Fluke 190 ScopeMeter Test Tool share the same electronics, with some feature differences highlighted below
Sampling size	2.5 GS/s max real time sampling rate; 5 GS/s max sequential sampling rate	2.5 GS/s max real time sampling rate	Real time sampling rate to capture all the details for troubleshooting electronic circuits
Safety rating	CAT III	CAT IV	Fluke 190 Series II covers all application installations from CAT II to CATIV
IP rating according to IEC529	IP 41	IP 51	Fluke 190 Series with IP51 rating is less susceptible to harm caused by environmental conditions no matter where it is used in a lab or the field
Software	OpenChoice	FlukeView®	FlukeView® makes it easy to extract, analyze and document waveforms
Probe size	Lab size	Industrial size	Optional Fluke VPS-510-x Probes offer same size and performance as standard lab grade scope probe

Specifications: Fluke 190-102/S ScopeMeter® Test Tool

Specifications
Bandwidth	100 MHz
Number of channels	100 MHz: 2 channels
Real-time sample rate	1.25 GS/s
Inputs	2 scope plus DMM input
Independently floating isolated inputs	Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Timebase range	5 ns - 2 min/div
Input sensitivity	2 mV-100 V/div
Trigger types	Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger source	Any scope input channel
Glitch capture	8 ns
Scope measurements	Cursor: 7
Scope measurements	Automatic: 30
Maximum record length	ScopeRecord mode: 30,000 pts
Maximum record length	Scope mode: 10,000 pts per input
Persistence	Digital persistence giving analog oscilloscope-like waveform decay
Waveform compare	Waveform reference with automatic Pass/Fail testing
DMM Specification
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)	4 mm banana inputs, fully isolated from scope inputs and from scope ground
Maximum resolution	5000 counts
Measurements	VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
Memory	Screen + Setup: 30
Memory	> Recording: 10
Display	153 mm full color LCD with fast update rate
Environmental Specifications
Operating temperature	0 °C to 40 °C Including Batteries
Operating temperature	0 °C to 50 °C Excluding Batteries
Storage temperature	-20 °C to +60 °C
Operating altitude	Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Operating altitude	Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Safety Specifications
Electrical safety	1,000 V CAT III/600 V CAT IV (EN61010-1)
Mechanical and General Specifications
Size	270 x 190 x 70 mm
Weight	2.2 kg
Warranty	3-years on main instrument, 1-year on accessories
Li-Ion battery	BP290 2400 mAh battery up to 4 hours included standard
Included Accessories
Two channel models	VPS410 Voltage Probe Sets (one red, one blue)
	TL175 TwistGuard™ safety designed Test Lead Set (red and black)
	BC190 Battery Charger/mains Adapter
	BP290 2400 mAh Li-ion Battery
	> Handstrap (affixed to instrument)
	Hangstrap
	Multi-Language User Manuals on CD-Rom
	FlukeView ScopeMeter® demo package (restricted functionality)
	USB Interface Cable
Warranty	Three years on main instrument, one year on accessories

Models: Fluke 190-102/S ScopeMeter® Test Tool

Fluke 190-102/S

Fluke 190-102/S ScopeMeter® Test Tool

Includes:

Color ScopeMeter® 100 MHz
2 channels
DMM/Ext.input
C290 Hard-shell Carrying Case
SW90W FlukeView for ScopeMeter Test Tool
Windows® software

Rated 1 out of 5 by Atech from This is a barebone scope; expect to pay a lot more The scope screen is mediocre at best. Very grainy. The scope comes without a case in a styrofoam box. Separate case cost $250 The FlukeView Software comes as a DEMO. Actual SW cost is about $270

Date published: 2018-05-03

Rated 5 out of 5 by Martok63 from Very Useful for Industrial Work We have a Fluke Scopemeter that is used to diagnose various machine failures in an Industrial facility. This meter has saved thousands of dollars in lost time, material and wasted repair parts. Very useful for drive (AC or DC) repair and diagnosis. It is also easy to use and easy to learn for those without O-scope experience. I highly recommend this for Industrial Electronics repair work.

Date published: 2013-10-03

Rated 1 out of 5 by iratebill from Not very functional The models currently available and being made are different than the documentation available on the fluke web site, so I am was not even sure what I was ordering. At some point they switched from optical cable to a usb cable for remote control, but didn't update any of the documentation. The software that came with my scope did not list my scope as being compatible with the software. The manuals also covered the old optical cable and didn't cover the newer usb hardwired cable. The flukeview software hangs for 10 to 30 seconds in response to simple mouse clicks. The remote control feature does not work at all, and I don't know if there is a problem or if it is incompatible to the new model.

Date published: 2013-09-11

Rated 2 out of 5 by Kaz911 from Old dog in a new suit The Fluke Scopemeteres are famous and rightly so. High quality build with great features. But now the future has surpassed the current 190 series II. The scope works more or less as their older models. Nothing new really. Battery capacity has improved and weather sealing is better. And they have introduced a 4 channel scope version without DMM function. But the rest of the instrument is stuck in the past. Screen has just about 0 viewing angle and low resolution. It is absolutely not viewable in sunlight at all and has not got very good contrast. My old B/W Scopemeter 124 is so much more usable outside. Scope and DMM can't be used at the same time. And if you need to record - you can again not use DMM and Scope recording features at the same time. And then there is Fluke View. Connection now is with USB - which is much better than the old "IR" Serial/USB. But Fluke View still looks like it is made for Windows 3.1 - and stuck in the past. So in short - if you want a Fluke Scopemeter - there is no reason to get the Series 2 unless you need the 4 channel scope version. If you are looking at 2 scope channels and DMM - any older Scopemeter will serve you just as well.

Date published: 2012-07-31

Rated 4 out of 5 by grspider from A performance scope in a portable package This is my first digital scope, switching from a 1995 analog 100MHZ Tek. I'm dealing primarily with electronics and automation systems and the two main reasons for this purchase are portability and the isolated floating inputs, allowing me to measure line voltage and make basic quality measurements in conjunction with a current probe, a nice added bonus without requiring a diff. probe. The scope has lived up to my expectations for the aforementioned applications, however I found it's LCD panel to be difficult to read under various angles, and slow in response (it's actual refresh rate and not the waveform update rate). It reminded me of older generation passive LCD displays and I expected something better. Moreover it's resolution is relatively low (1/2 VGA) and the pixels are large enough to be very easily visible. I guess Fluke compromised on the display for power saving and/or ruggedness reasons. The multimeter (I have the 190-202) is decent although capacitance measurements and direct thermocouple inputs would be nice. The trendplotting function is excellent and provides live graphing (a feature that is missing from my 289). To conclude, this scope has already replaced my bench scope and apart from it's LCD it's an excellent instrument.

Date published: 2012-06-27

Rated 5 out of 5 by Greg58 from Easy to use. Packed with features. Outstanding software. My first Fluke DSO was the 2-channel monochorme 50 MHz 99 that I still have for home use. It was an outstanding scope when introduced more than 15 years ago and the only thing I've replaced is the batteries. The 190 Series II is even better with its' greater bandwidth, improved software, larger screen, and the color display makes it even easier to identify traces. I've used it to diagnose steam turbine speed probe problems, power supply noise, VFD's, capture data bus echoes, switch chatter, and so on. I've also used it as a teaching tool. Most techs are intimidated by oscilloscopes, not wanting to "look stupid", but when I show them that all you've got to do is hook it up to the signal source and press the auto setup to display a perfectly scaled trace, they usually relax and become interested. Then I introduce them to the rest of the features, one at a time, and they're hooked. It's an impressive instrument.

Date published: 2012-06-08

Rated 5 out of 5 by MrEds from Great product I used this scopemeter on a project that requires the monitoring of many test points at the same time. The scopemeter has the ability to do this for four different signals at different voltage levels, This is a great help and can simplify the test setup. It is great to be able to switch from the scopemeter to scope mode with the press of a button. I am looking forward to useing it on future projects.

Date published: 2012-06-08

Rated 4 out of 5 by JRH1914 from 196C Set: solid product We bought a new 196C Color 2 channel Scope-meter. It works as advertised. Good performance. Software allows pc screen shots, though limited internal memory does not allow much.

Date published: 2012-06-08

Please enable cookies to view product reviews.