Fluke BC190 Line Voltage Adapter / Battery Charger
Fluke BC190 Line Voltage Adapter / Battery Charger is rated out of 5 by 1.
Product overview: Fluke BC190 Line Voltage Adapter / Battery Charger
Provides power cord operation and charging for ScopeMeter 190 Series test tool.
Specifications: Fluke BC190 Line Voltage Adapter / Battery Charger
Specifications | |
Mains (Line voltage) | BC190/820 (Universal) 100 V to 240V ± 10% |
Frequency (all versions) | 50…60 Hz ± 10% |
Output voltage | 17.8 V DC |
Output power | 15 W |
Power Consumption | 23.7 V A |
Max. voltage to ground | 600 Vrms CAT III per IEC 1010-1 |
808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) |
Rated 1 out of 5 by AutoEng81 from 2 like new adapters already failed I have had two of these go bad. The first failure prompted me to repair my Fluke 196C Scopemeter ($$). The repair was temporary until my battery died and I couldn't power up the scopemeter again. This then prompted me to purchase a new Fluke 190-102 Scopemeter ($$$$) that came with it's own AC adapter. This lasted 2 years before power up issues occurred. After immense frustration, I dedicated my own time to troubleshooting and isolated the problem to the either the rectifier circuit in the adapter or the connection in the molded output plug. THIS SHOULD NOT BE AN ISSUE ON THIS TYPE OF COMPONENT ON TWO SEPARATE DEVICES!
Date published: 2017-11-15