Procurar Resultados

MET/TEAM v3.3.1 with MET/CAL v11.0.0 Trial (5.10 GB)Document(s): MET/TEAM Installation Guide (2.06 MB)Updating to MET/TEAM 3.3.1 and MET/CAL 11.0.1 (358.36 KB)MET/TEAM 3.3.1 Read Me (370.06 KB)MET/CAL 11.0.1 Read Me (419.71 KB)MET/TEAM 3.3.0 Read Me (467.11 KB)MET/CAL 11.0.0 Read Me (433.52 KB)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.1 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.1 release is a minor update to MET/CAL...

Whether you're simulating thermocouples or calibrating thermocouples directly through comparison methods, Fluke offers the most comprehensive selection of quality thermocouple calibrators on the market, including thermocouple simulators, handheld multifunction calibrators, temperature sources such as dry-block calibrators and liquid baths, thermocouple reference Standards, and thermocouple readouts.Thermocouple calibration product categories include:Handheld thermocouple calibrators and simulatorsComparison...

Fluke Calibration provides solutions to all FAQs related to calibrating a heat source using MET/TEMP II.

a.anchor { scroll-margin-top: 100px; scroll-snap-margin-top: 100px; } Calibration is configuring and verifying a measuring instrument's accuracy to ensure its readings match a known standard. It’s a foundational practice across healthcare, electronics, manufacturing, and environmental monitoring.Instruments naturally experience wear, drift, and environmental impact over time, which can compromise their performance. Calibration restores their accuracy and ensures consistent, reliable operation that...

O calibrador de potência trifásico 6003A é o modo mais econômico de obter a precisão e desempenho superiores em um instrumento de três fases independentes.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

O calibrador multi-produto 5502A aborda itens de carga de trabalho comuns, como 3,5 e 4,5 dígitos multímetros digitais e muito mais

The 4322 Automated Pressure Calibration System calibrates almost any pressure gauge, transducer, transmitter or switch—including vacuum, compound, absolute & high-pressure devices.

Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/CONNECT version 2.0.0 (with MET/CAL version 10.4.0) (.zip)Documents:MET/CONNECT version 2.0.0 (with MET/CAL version 10.4.0) (.pdf)MET/CONNECT 2.0.0 Readme (.pdf)MET/CAL 10.4.0 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.0.0 and MET/CAL version 10.4.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can initiate a new install...

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

MET/TEAM version 2.1 with Update 1 (with MET/CAL version 9.0 with Update 1) (.iso)Documents:MET_TEAM_2_1_2_readme (.pdf)METCAL_9.0.0_ReadMe (.pdf)Please read the MET/TEAM Readme file before installing the upgrade.Please note that upgrading from any previous version of MET/TEAM will require you to re-request all of your licenses via email once the upgrade is complete! You must provide your original product codes and gold number(699XXXX) as two separate product code entry lines.If you are upgrading...

FPGTools PC Based Software (.exe)File size is 171.33 mb.TITLEVERUSE WITHFPGTools™3.03f2010.06.03FPG8601DescriptionFPGTools is PC based software.SummaryThis application is the PC interface to the FPG8601 and the VLPC. Features are included to log data from the FPG and up to 5 DUTs, run test sequences, and perform all necessary routine procedures required by the FPG. This application cannot be used without an FPG8601 and a functioning RS232 port on the host computer.Instructions:Download and run...

Coleta de dados regulamentada com o FDA 21 CFR Part 11 e o AMS 2750

Os laboratórios de calibração enfrentam diversos desafios: uma carga de trabalho crescente e mais complexa; menos técnicos; uma lista crescente de padrões de qualidade. Acima de tudo, existe uma pressão constante para redução dos custos. O software Fluke Calibration ajuda a responder a tais desafios ao calibrar e gerenciar sua carga de trabalho com mais eficiência e uniformidade.

Entre em contato com a linha direta MET/SUPPORT Gold de segunda a sexta-feira, das 8h às 16h30, horário do Pacífico (Estados Unidos, Canadá, México, América Central e América do Sul) ou horário do Meridiano de Greenwich (Europa) para falar com um dos nossos especialistas em software altamente qualificado

WinFlash Free Utility (.exe)Additional Downloads: WinFlash64™ 2.20 (64bit OS) (.exe)PC BasedFree Utilities - WinFlash™TITLEVERUSE WITHWinFlash™2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTWinFlash64™(64bit OS)2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTDescriptionFirmware upgrade utility. This program...

Update: MET/TEAM version 2.3.0 (with MET/CAL version 9.2.0) (.iso)Documents:MET/CAL 9.2.0 Readme (.pdf)MET/TEAM 2.3.0 Readme (.pdf)FAQ for MET/TEAM version 2.3.0 and MET/CAL version 9.2.0Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 2.3.0 and MET/CAL version 9.2.0 release is a security and stability update to previous MET/TEAM and MET/CAL software. This update includes security improvements, bug fixes, and minor updates.Upgrading from any previous version...

Update: MET/TEAM version 2.2.1 (with MET/CAL version 9.1.1) (.iso)Documents:MET/CAL 9.1.1 Readme (.pdf)MET/TEAM 2.2.1 Readme (.pdf)Updating to METTEAM 2.2.1 and METCAL 9.1.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 2.2.1 and MET/CAL version 9.1.1 release is a stability update to previous MET/TEAM and MET/CAL software. This update includes bug fixes and minor updates.Upgrading from any previous version of MET/TEAM will require you to re-request...

Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3) (.zip)Documents:MET/CONNECT 1.3.0 Installation Guide (.pdf)MET/CONNECT 1.3.0 Readme (.pdf)MET/CAL 10.2.3 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.3.0 and MET/CAL version 10.2.3 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.2.0 before upgrading to version 1.3.0.This...

Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2) (.zip)Documents:MET/CAL 10.2.2 readme (.pdf)MET/CONNECT 1.2.0 readme (.pdf)MET/CONNECT 1.2.0 Installation Guide (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.2.0 and MET/CAL version 10.2.2 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.1.0 before upgrading to version 1.2.0.This...

Update: MET/CONNECT version 1.1.0 (with MET/CAL version 10.1.0) (.zip)Documents:MET/CAL 10.1.0 readme (.pdf)MET/CONNECT 1.1.0 Installation Guide (.pdf)MET/CONNECT 1.1.0 readme (.pdf)Review to our Quick Installation Guide on the Fluke Calibration Support Knowledge Base: https://support.flukecal.com/hc/en-us/articles/360042286051Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.1.0 and MET/CAL version 10.1.0 release is an update to previous MET/CONNECT...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your Fluke 700HPPK/700HPM. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have any questions, please do not hesitate to contact us. https://www.fluke.com/en-us/support/technical-support

Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

RPTLoad Free Utility (.exe)TITLEVERUSE WITHRPTLoad™ Free Utility1.04cAll products with quartz crystal based RPTs or Q-RPTsInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe RPTLoad program is designed to transfer RPT coefficients to and from DHI products. In addition to updating coefficients, RPTLoad can also be used to configure RPM1 reference pressure monitors.Updates Include:Ver 1.04c (03 OCT 20)FIX: Corrected support of BG TYPE...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

Release: MET/CONNECT version 2.1.1 (with MET/CAL version 11.0.0) (.zip)Documents:MET/CONNECT Installation Guide (.pdf)MET/CONNECT 2.1.1 Readme (.pdf)MET/CAL 11.0.0 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.1.1 and MET/CAL version 11.0.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can initiate a new install as well as update an existing...

As atividades de administradores nos sistemas MET/CAL®, 5500/CAL e MET/TRACK® estão limitadas a atividades relacionadas ao sistema.

Assistência a migração de banco de dados

Recuperação de dados a partir de banco de dados corrompido

Release: MET/CONNECT version 2.1.0 (with MET/CAL version 10.6.0) (.zip)Documents:MET/CONNECT 2.1.0 Installation Guide (.pdf)MET/CONNECT 2.1.0 Readme (.pdf)MET/CAL 10.6.0 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.1.0 and MET/CAL version 10.6.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can initiate a new install as well as update...

Release: MET/CONNECT version 1.0.0 (with MET/CAL version 10.0.0) (.zip)Documents:MET/CONNECT 1.0.0 Installation Guide (.pdf)MET/CONNECT 1.0.0 readme (.pdf)MET/CAL 10.0.0 readme (.pdf)Review our Quick Installation Guide on the Fluke Calibration Support Knowledge Base.New MET/CONNECT Customers or Current MET/TEAM or METBASE customersThis download is the 60-day trial version. Use the MET/CONNECT Server Installer to perform a new installation. This installer is included in the download link above and...

PPCK+ v1.00m Embedded Software (.bin)TITLEVERUSE WITHPPCK+™1.00m2005.01.05PPCK+Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4 Cockpit Free Utility - 32bit Installer (.exe)Additional Downloads:PPC4 Cockpit Free Utility - 64bit Installer (.exe)TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4Reference the PPC4 Operation and Maintenance manual for details on the operation of the PPC4 Cockpit.Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe PPC4 Cockpit is a free...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

PPC2-AF v1.01e Embedded Software (222.5 KB)TITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFTITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFInstructions:Do Not use with PPC2+!This software revision affects only the PPC2-AF on-board routines for calibration of the PPC2-AF's RPTs. It has no effect on regular operation. This new release is recommended for all PPC2-AF units, in particular those on which difficulty with calibration of the Lo Reference Pressure Transducer has been encountered. The FCAL...

PPC2+ v2.02f Embedded Software (.bin)TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+Instructions:Do Not use with PPC2-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

PG7601-AF v2.08f Embedded Software (.bin)TITLEVERUSE WITHPG7601-AF™2.082007.07.25PG7601-AFInstructions:-Ver 2.07x UsersYou can upgrade directly to this version with no special considerations.If you need to revert from v2.08 back to one of the v2.07 versions, you must first load v2.07, cycle power and accept the upgrade queries and then load the desired v2.07x firmware.If you need to revert from v2.08 back to a version earlier than v2.07, please contact Fluke Service.Updates Include:Ver 2.08 (2022...

Obtenha calibração precisa para osciloscópios de até 4 GHz com o Fluke 9500C. Apresenta a Active Head Technology™ para uma calibração eficiente e automatizada em vários canais.

9500B e tirem proveito dos produtos e desempenhos mais recentes. O 9560 é capaz de oferecer onda senoidal equilibrada de 6,0 GHz e bordas de pulso de somente 70 ps.

PG7000/PG9000 Ver 3.1.5.255 Embedded Software (.bin)TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.Instructions:The PG7000/PG9000 firmware versions 3.00 and newer are intended to work with all PG9000 models and PG7000 models with serial numbers 733 or newer. Do not attempt to upgrade an older PG7000 model with this software. This upgrade does not...

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

PG7000 Ver 1.05f Embedded Software (.bin)TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:Download the file. Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

Minimum recommended system requirementsMET/TEAM server*  SQL DatabasesOperating SystemsSQL Server 2012SQL Server 2014SQL Server 2016SQL Server 2017SQL Server 2019SQL Server 2022Windows 10√√√√√√Windows 11Not supportedNot supportedNot supported√√√Windows Server 2016Not supported√√√√√Windows Server 2019Not supported√√√√√Windows Server 2022Not supportedNot supportedNot supported√√√*Home, Home Basic, Home Premium, and Core editions of Windows are not supported.Database...

LogWare III v3.1 Working Demo (.zip)Documents:LogWare III User's Guide (.pdf) Before proceeding to install the DEMO version the database Postgree SQL must be installed first. Please click in the link below to learn how to install the database and LogWare III. https://support.flukecal.com/hc/en-us/articles/360052293072-LogWare-III-Version-3-1-InstallationLogWare III (Model 9936A) DemoDescription: The LogWare III Working Demo does everything the actual software does. The demo version is limited...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Hot Fix: MET/CAL version 10.1.0 Hot Fix (.zip)Documents:MET/CAL version 10.1.0 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.For additional information on applying this Hot Fix, see the following article on our support knowledge base: How to Get and Apply the MET/CAL 10.1.0 Hot FixCurrent MET/CAL Customers:The MET/CAL 10.1.0 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include...

CI Editor PC Based Free Utility (.exe)Additional Downloads:Mensor 400 CI Definition (.ci)Mensor 600 CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)Ruska 6000 CI Definition (.ci)All Ruska models that support the SCPI command syntax (.ci)TITLEVERUSE WITHDOCUMENTSCI Editor™1.002009.03.06PPC4See CI Editor [Help] menu to access the help system.Instructions:The CI Editor is used to maintain CI Definitions for the PPC4.Download and run the file. The...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

9170 Firmware (.zip)Additional Downloads:9171 Firmware (.zip)9172 Firmware (.zip)9173 Firmware (.zip)Title:917X FirmwareVersions:9170: Ver. 1.209171: Ver. 1.209172: Ver. 1.209173: Ver. 1.20Use with:All 9170, 9171, 9172 and 9173Date Modified:1/1/2012Download Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial...

9142 US/EU ver 1.35 firmware update (.zip)Additional Downloads:9142 Asia ver 1.35 firmware update (.zip)9143 US/EU ver 1.35 firmware update (.zip)9143 Asia ver 1.35 firmware update (.zip)9144 US/EU ver 1.35 firmware update (.zip)9144 Asia ver 1.35 firmware update (.zip)Download appropriate file from above. See "Instructions" below to determine correct file. Title914x Ver 1.35 UpdateVer1.35/1.35Use withAll 9142/9143/9144 Field Metrology Wellswith internal reference readout (–P option)Date Modified18-May-2012Description...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

4181 Firmware Update (.zip)Title:4181 Firmware UpdateVer:1.14/1.15Use with:4181Date modified:04/22/2021Description of the change:Firmware updated to support a Heater reconfiguration due to excessive heater damage. This fix reduces the maximum duty cycle of the Gradient heaters during Ramp as well as at Steady state conditions. This is used in conjunction with hardware changes to Heater and insulation configuration.Recalibration of unit is not required with this update when using the initial Block...

2271A Embedded Software, Update by USB (zip)TITLEUSE WITH2271A2271AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 2271ABegin by clicking on the Get software button. Then download the zip file by clicking the 2271A v10x USB.zip...

Otimize o desempenho solar: Analisador fotovoltaico PVA-1500HE2, alicate amperímetro 393 FC e multímetro 87V

Otimize o desempenho solar: Analisador fotovoltaico PVA-1500HE2 e medidor de isolamento 1537 de 2500V

Optimize Solar Performance: PVA-1500HE2 PV Analyzer & TiS75+ Thermal Camera

Otimize o desempenho solar: Analisador fotovoltaico PVA-1500HE2, multímetro para isolamento 1587 FC, alicate amperímetro 393 FC e multímetro 87V

Meça e exiba curvas I-V de até 1.500 V/30 A, com modelagem fotovoltaica avançada, varreduras rápidas, configuração sem fio e gerenciamento automatizado de dados.

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N (Recalled Cable). We have received your information, and your order is in process. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have...

Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and 1777.Fluke 177x v3.1 Firmware File (.bin)To update instruments running firmware revision 2.0 or earlier, create a directory titled ‘Fluke177x’ on a USB stick and copy the firmware binary to that directory location.The USB stick must be exFAT or FAT32 formatted, and the above-mentioned directory must be located...

The easy-to-use data management and reporting solution.

At Fluke, our commitment to quality is the foundation of our success. We are dedicated to delivering products and services that meet or exceed the highest quality standards in the industry, as defined by ISO requirements, customer expectations, and our own corporate values. Our practices reflect our commitment to customer satisfaction, continuous improvement, and the pursuit of excellence across our operations worldwide.Fluke Corporate Quality Manuals and PoliciesQuality ManualsFluke Corporate Quality...

To upgrade your 729 to the latest firmware, follow these simple instructions: Download Fluke−729 Version firmware upgrade and save the firmware upgrade file. Ensure your Fluke 729 is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 729 while the update is in progress. Version 0.54 adds the following enhancements: Allows you to increase the accuracy of automatic...

Participe e receba 25% de desconto para produtos e materiais!* Nós reunimos técnicos e escolas de formação professional para trazer a você as últimas informações sobre aplicação e ferramentas para a sala de aula. Receba materiais GRATUITAMENTE Apresentações de PowerPoint Notas de Aplicação e Estudos de Caso CDs, DVDs & Posters Frete Grátis Equipe seu laboratório e ajude seus estudantes a adquirir ferramentas profissionais com desconto substancial. Escolha desde multímetros digitais,...

 For use with Fluke 120B Series or 190 Series III ScopeMeter® Test Tools, and MDA-510 and MDA-550 Motor Drive Analyzers.Application software for download, analysis and reporting. This is a demo version with limited functionality.The full version can be obtained with activation key that is available as an option.64bit OS: FlukeView-2 for ScopeMeter® Test Tools version 3.2.0 (.exe) »32bit OS: FlukeView-2 for ScopeMeter® Test Tools version 3.2.0 (.exe) »For a list of improvements associated...

Fluke 753 and 754 Documenting Process Calibrator Firmware UpgradeTo upgrade your 753 or 754 to the latest firmware, follow these simple instructions:Download firmware version 1.06 or 1.16 depending on which firmware your calibrator is currently using, and save the firmware upgrade file.For calibrators currently running firmware versions 1.00, 1.01, 1.02, 1.03, 1.04 or 1.05 download firmware V1.06 (.exe)For calibrators currently running firmware versions 1.10, 1.11, 1.13, 1.14 or 1.15 download firmware...

Applies only to calibrators with Firmware Version 1.00, 1.01, 1.02, 1.03 and 1.04 To upgrade your 753/754 to the latest firmware, follow these simple instructions: Download Fluke−75X Version 1.05 firmware upgrade and save the firmware upgrade file. Ensure your Fluke 75x is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 75x while the update is in progress. Once...

Your free pressure calibration pain points application note can be accessed using the link below. Download now For more information on the Fluke 729 Automatic Pressure Calibrator and how it can simplify the way you calibrate pressure click here.

Automotive measurements include pulse width, duty cycle, Min/Max/Avg recording

General   Q: How much does the app cost? A: The mobile app is free to download on compatible devices from the Apple App Store or Google Play. There are multiple options for purchasing subscriptions of Fluke Connect® Assets. Apple Store (iTunes) – One 12 month license subscription costs USD $249.99 Google Play – One 6 month subscription costs USD $149.99 You may also purchase both single and multiple licenses at once for your team. You can get 5-license subscriptions at USD $1,199.99...

Receba sua nova ferramenta Fluke pronta para ser usada, com um certificado de calibração rastreável. Se você trabalha sob um contrato do governo regido pelas normas ISO 9000 e regulamentos do FDA, ou uma de muitas outras empresas que exigem capacidade de rastreamento nos processos de medição, vamos ajudá-lo a economizar tempo.

How can I determine if my VoltAlert is being recalled?

Availability of replacement parts is a key element in providing quick turnaround and product support for customers who perform their own maintenance. By providing quality parts we will help return your Fluke products to peak performance. All replacement parts are warranted against defects in materials and workmanship for 90 days after shipment. Our replacement parts meet Fluke original equipment standards. Place your orders in the U.S. by calling (1-800-526-4731). Outside the US, replacement parts...

Perguntas Frequentes sobre o Multímetro Digital

Battery pack as replacement battery in the Fluke 120 series ScopeMeters test tools and in the Fluke 43 and 43B Power Quality Analyzers.

Software de Relatório e Análise SmartView® da Fluke – acompanha a Câmera de infravermelho e o Termômetro de IR, faça já o download Faça o download do Fluke SmartView Mobile na App Store - pesquise SmartView.

Applies only to Firmware Version 1.00, 1.01 and 1.02 To upgrade your 75X to the latest firmware, follow these simple instructions: Download Fluke?75X Version 1.03 firmware upgrade and save the firmware upgrade file. Ensure your Fluke 75x is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 75x while the update is in progress. Once the update is complete, cycle the...

Upgrade to FlukeView version 5.4 (.exe)   Application software for download, analysis and reporting. Used with Fluke 190 Series II, Fluke 120 Series, Fluke 19xB/C Series and Fluke 2x5C Series. This is a demo version with limited functionality. The full version can be obtained with activation key that is available as an option. Release notes: Relative to the previous version the following changes have been implemented: Support for increased amount of memory locations in newer Fluke-104 and Fluke-204...

Applies only to Firmware Version 1.10 and 1.11 To upgrade your 75X to the latest firmware, follow these simple instructions: Download Fluke?75X Version 1.13 firmware upgrade and save the firmware upgrade file. Ensure your Fluke 75x is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 75x while the update is in progress. Once the update is complete, cycle the 75x...

FlukeView Forms Basic 3.8.4 (.exe)FlukeView Forms plus Designer 3.8.4 (.exe)Fluke 975 USB Drivers 1.5.0.22 (.zip)FlukeView Forms Software.Anyone with FlukeView Forms version 3.0 or later can receive a free software update by clicking the links and downloading the software from this site. Basic users would select the "Basic" link and users with the complete package would select the "plus Designer" link. If your present FlukeView Forms software is older than version 3.0 (less than 3.0) you must purchase...

Download Fluke 744 Firmware Upgrade v4.03/4.53 (.exe) This firmware update includes Fluke 744 HART support for: ABB / Kent Taylor 600T pressure transmitter v5.3 Foxboro I/A Pressure transmitter v5.2 Honeywell ST3000 pressure transmitter v6.4 Rosemount 3144 temperature transmitter v5.4 Rosemount 644 temperature transmitter v5.7 Rosemount 3051C pressure transmitter v5.7 The update is performed on a Windows PC with the 744 connected via serial cable. Follow the instructions for doing the update. Do...

For model numbers Ti20 and Ti30.Download this software upgrade here (.exe)For installation instructions, please download the README document prior to downloading.For maximum results delete the temporary folder c:\InsideIR 4.0Install\ after sucessful installationInsideIR 4.0 features:Advanced Analysis Tools – points, lines, rectangles, ellipses, polygons, and curved areas.Enhanced profile toolTrendingIncreased routing flexibility.Reporting enhancements:Advanced reports, trending reports and up to...