Resultados de la búsqueda

IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

What issues exist when using TableWare  on Windows® 2000 or Windows® XP?I need to analyze the table data in another application. How can I get the table data into my other application without having to type it in?I frequently use the same set of temperature set-points to calibrate probes. How can I avoid having to type in each temperature every time I do a new calibration?Questions and AnswersQ. What issues exist when using TableWare on Windows® 2000 or Windows® XP?A. Microsoft has obsoleted...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

MET/TEAM v3.3.1 with MET/CAL v11.0.0 Trial (5.10 GB)Document(s): MET/TEAM Installation Guide (2.06 MB)Updating to MET/TEAM 3.3.1 and MET/CAL 11.0.1 (358.36 KB)MET/TEAM 3.3.1 Read Me (370.06 KB)MET/CAL 11.0.1 Read Me (419.71 KB)MET/TEAM 3.3.0 Read Me (467.11 KB)MET/CAL 11.0.0 Read Me (433.52 KB)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.1 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.1 release is a minor update to MET/CAL...

Whether you're simulating thermocouples or calibrating thermocouples directly through comparison methods, Fluke offers the most comprehensive selection of quality thermocouple calibrators on the market, including thermocouple simulators, handheld multifunction calibrators, temperature sources such as dry-block calibrators and liquid baths, thermocouple reference Standards, and thermocouple readouts.Thermocouple calibration product categories include:Handheld thermocouple calibrators and simulatorsComparison...

Fluke Calibration provides solutions to all FAQs related to calibrating a heat source using MET/TEMP II.

The IR Configuration Utility includes an export feature that will allow you to save the information for custom configurations to a file.

How does the Hydra need to be configured to be used with MET/TEMP II?I calibrated some probes using the Hydra, but when I print the Report of Calibration, "No Reading" is printed in the UUT column. Why did this happen?Questions and AnswersQ. How does the Hydra need to be configured to be used with MET/TEMP II?A. When using a Hydra Series II Dataglogger with MET/TEMP II, you must enable and configure each channel manually, before starting a calibration, to read the appropriate scale. When a calibration...

MET/TEMP II can interface with the MET/TRACK database. However, MET/TEMP II can still be used as a stand-alone system.

Installing MET/TEMP IICan MET/TEMP II be installed on computers running Windows® Vista?When I install MET/TEMP II, I am prompted to enter a serial number. Where do I find my serial number?I downloaded MET/TEMP II from the internet and installed the demo version. Now I want to buy it and start using it. What do I need to do?I am currently a Fluke MET/TEMP software user. What do I need to know about upgrading to MET/TEMP II?I am currently a Calibrate-it and Generate-it user. What do I need to know...

MET/TEMP II expects ALL test probes to be in the same heat source at the same time. Since the software only supports one reference probe

MET/TEMP II is intended to replace Fluke's MET/TEMP software. MET/TEMP II is a completely different software package than MET/TEMP

Can Interface-it be installed on computers running Windows® Vista?Will Interface-it allow me to control more than one instrument simultaneously from my PC?Can I test more than one thermal switch at a time?Interface-it does not run. I keep getting a communication error.Does Interface-it add Ramp and Soak functionality to my bath?How can I prevent users from changing calibration constants and other critical instrument settings?Questions and AnswersQ. Can Interface-it be installed on computers...

a.anchor { scroll-margin-top: 100px; scroll-snap-margin-top: 100px; } Calibration is configuring and verifying a measuring instrument's accuracy to ensure its readings match a known standard. It’s a foundational practice across healthcare, electronics, manufacturing, and environmental monitoring.Instruments naturally experience wear, drift, and environmental impact over time, which can compromise their performance. Calibration restores their accuracy and ensures consistent, reliable operation that...

1594A/1595A Firmware update version 1.22 (.ud)Title: 1594A & 1595AVer: 1.22/1.02Use with: All 1594A & 1595ADate Modified: 2/20/2014Description of the change:  It was recently determined that when a customer selects the “Restore Factory Default” button in the Config Menu, the resistor calibration values are reset to the default values without requiring a password or notification to the customer that the values are being reset. Engineering has investigated this issue and the instrument firmware...

Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/CONNECT version 2.0.0 (with MET/CAL version 10.4.0) (.zip)Documents:MET/CONNECT version 2.0.0 (with MET/CAL version 10.4.0) (.pdf)MET/CONNECT 2.0.0 Readme (.pdf)MET/CAL 10.4.0 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.0.0 and MET/CAL version 10.4.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can initiate a new install...

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

MET/TEAM version 2.1 with Update 1 (with MET/CAL version 9.0 with Update 1) (.iso)Documents:MET_TEAM_2_1_2_readme (.pdf)METCAL_9.0.0_ReadMe (.pdf)Please read the MET/TEAM Readme file before installing the upgrade.Please note that upgrading from any previous version of MET/TEAM will require you to re-request all of your licenses via email once the upgrade is complete! You must provide your original product codes and gold number(699XXXX) as two separate product code entry lines.If you are upgrading...

FPGTools PC Based Software (.exe)File size is 171.33 mb.TITLEVERUSE WITHFPGTools™3.03f2010.06.03FPG8601DescriptionFPGTools is PC based software.SummaryThis application is the PC interface to the FPG8601 and the VLPC. Features are included to log data from the FPG and up to 5 DUTs, run test sequences, and perform all necessary routine procedures required by the FPG. This application cannot be used without an FPG8601 and a functioning RS232 port on the host computer.Instructions:Download and run...

For FDA 21 CFR Part 11 and AMS 2750 Compliant Data Collection

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

COMPASS Example Set Up Database (.mdb)About COMPASS ExamplesCOMPASS examples are existing setups that are used as a guide to help add a new device to COMPASS.  There are 2 types of examples: those that appear directly in the DUT and/or Support Device Editors and those that do not.  Only a few examples are visible in the device editors.  This is in an attempt to minimize the confusion between various COMPASS setups.  The majority of the COMPASS examples are not directly visible to the user. ...

WinFlash Free Utility (.exe)Additional Downloads: WinFlash64™ 2.20 (64bit OS) (.exe)PC BasedFree Utilities - WinFlash™TITLEVERUSE WITHWinFlash™2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTWinFlash64™(64bit OS)2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTDescriptionFirmware upgrade utility. This program...

Update: MET/TEAM version 2.3.0 (with MET/CAL version 9.2.0) (.iso)Documents:MET/CAL 9.2.0 Readme (.pdf)MET/TEAM 2.3.0 Readme (.pdf)FAQ for MET/TEAM version 2.3.0 and MET/CAL version 9.2.0Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 2.3.0 and MET/CAL version 9.2.0 release is a security and stability update to previous MET/TEAM and MET/CAL software. This update includes security improvements, bug fixes, and minor updates.Upgrading from any previous version...

Update: MET/TEAM version 2.2.1 (with MET/CAL version 9.1.1) (.iso)Documents:MET/CAL 9.1.1 Readme (.pdf)MET/TEAM 2.2.1 Readme (.pdf)Updating to METTEAM 2.2.1 and METCAL 9.1.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 2.2.1 and MET/CAL version 9.1.1 release is a stability update to previous MET/TEAM and MET/CAL software. This update includes bug fixes and minor updates.Upgrading from any previous version of MET/TEAM will require you to re-request...

Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3) (.zip)Documents:MET/CONNECT 1.3.0 Installation Guide (.pdf)MET/CONNECT 1.3.0 Readme (.pdf)MET/CAL 10.2.3 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.3.0 and MET/CAL version 10.2.3 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.2.0 before upgrading to version 1.3.0.This...

Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2) (.zip)Documents:MET/CAL 10.2.2 readme (.pdf)MET/CONNECT 1.2.0 readme (.pdf)MET/CONNECT 1.2.0 Installation Guide (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.2.0 and MET/CAL version 10.2.2 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.1.0 before upgrading to version 1.2.0.This...

Update: MET/CONNECT version 1.1.0 (with MET/CAL version 10.1.0) (.zip)Documents:MET/CAL 10.1.0 readme (.pdf)MET/CONNECT 1.1.0 Installation Guide (.pdf)MET/CONNECT 1.1.0 readme (.pdf)Review to our Quick Installation Guide on the Fluke Calibration Support Knowledge Base: https://support.flukecal.com/hc/en-us/articles/360042286051Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.1.0 and MET/CAL version 10.1.0 release is an update to previous MET/CONNECT...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your Fluke 700HPPK/700HPM. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have any questions, please do not hesitate to contact us. https://www.fluke.com/en-us/support/technical-support

Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

RPTLoad Free Utility (.exe)TITLEVERUSE WITHRPTLoad™ Free Utility1.04cAll products with quartz crystal based RPTs or Q-RPTsInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe RPTLoad program is designed to transfer RPT coefficients to and from DHI products. In addition to updating coefficients, RPTLoad can also be used to configure RPM1 reference pressure monitors.Updates Include:Ver 1.04c (03 OCT 20)FIX: Corrected support of BG TYPE...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

Release: MET/CONNECT version 2.1.1 (with MET/CAL version 11.0.0) (.zip)Documents:MET/CONNECT Installation Guide (.pdf)MET/CONNECT 2.1.1 Readme (.pdf)MET/CAL 11.0.0 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.1.1 and MET/CAL version 11.0.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can initiate a new install as well as update an existing...

Release: MET/CONNECT version 2.1.0 (with MET/CAL version 10.6.0) (.zip)Documents:MET/CONNECT 2.1.0 Installation Guide (.pdf)MET/CONNECT 2.1.0 Readme (.pdf)MET/CAL 10.6.0 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.1.0 and MET/CAL version 10.6.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can initiate a new install as well as update...

Release: MET/CONNECT version 1.0.0 (with MET/CAL version 10.0.0) (.zip)Documents:MET/CONNECT 1.0.0 Installation Guide (.pdf)MET/CONNECT 1.0.0 readme (.pdf)MET/CAL 10.0.0 readme (.pdf)Review our Quick Installation Guide on the Fluke Calibration Support Knowledge Base.New MET/CONNECT Customers or Current MET/TEAM or METBASE customersThis download is the 60-day trial version. Use the MET/CONNECT Server Installer to perform a new installation. This installer is included in the download link above and...

PPC4 Cockpit Free Utility - 32bit Installer (.exe)Additional Downloads:PPC4 Cockpit Free Utility - 64bit Installer (.exe)TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4Reference the PPC4 Operation and Maintenance manual for details on the operation of the PPC4 Cockpit.Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe PPC4 Cockpit is a free...

molLoad Free Utility (.exe)TITLEVERUSE WITHmolLoad™ Free Utility1.01amolbox1, molbox RFMTITLEVERUSE WITHmolLoad™ Free Utility1.01amolbox1, molbox RFMInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionSelf extracting installation file for the molLoad molbloc EEPROM restore utility.SummaryInstructions: molLoad will only install on 32-bit Microsoft Windows operating systems. Do not attempt to install on a Windows 64-bit operating system...

Minimum recommended system requirementsMET/TEAM server*  SQL DatabasesOperating SystemsSQL Server 2012SQL Server 2014SQL Server 2016SQL Server 2017SQL Server 2019SQL Server 2022Windows 10√√√√√√Windows 11Not supportedNot supportedNot supported√√√Windows Server 2016Not supported√√√√√Windows Server 2019Not supported√√√√√Windows Server 2022Not supportedNot supportedNot supported√√√*Home, Home Basic, Home Premium, and Core editions of Windows are not supported.Database...

LogWare III v3.1 Working Demo (.zip)Documents:LogWare III User's Guide (.pdf) Before proceeding to install the DEMO version the database Postgree SQL must be installed first. Please click in the link below to learn how to install the database and LogWare III. https://support.flukecal.com/hc/en-us/articles/360052293072-LogWare-III-Version-3-1-InstallationLogWare III (Model 9936A) DemoDescription: The LogWare III Working Demo does everything the actual software does. The demo version is limited...

LEMCal Laboratory Environment Monitor software (.zip)Requirements:Microsoft® Windows® 95 or higher (Windows 7 32-bit and 64-bit are supported)1.6 MB of available hard disk space,32 MB RAM,RS-232 or RS-485 portInterface includes extensive help and system manual includes syntax commands.Unzip the downloaded file and click on LemCAL.exe to install.Version 1R08File size: 4 MB

LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator »  LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator » 7250 Series Pressure Controller/Calibrator » 7615 Hydraulic Pressure Controller/Calibrator » 7750i Air Data Test Set » molbox1+ Mass Flow Terminal » PPC4 Pressure Controller/Calibrator » PPCH Hydraulic Pressure Controller/Calibrator » RPM4 Reference Pressure...

LabVIEW driver for PPC3 and PPCH (.exe)Additional Downloads:LabVIEW driver for PPC2+ and PPCK+ (.exe)LabVIEW driver for PPC2 and PPCK (.exe)LabVIEW driver for RPM3 (.exe)LabVIEW driver for RPM4 (.exe)LabVIEW driver for molbox (.exe)LabVIEW driver for molbox RFM (.exe)LabView® drivers for Pressure ProductsUSE WITHVERDOWNLOADPPC3™DescriptionLabView is a registered trademark of National Instruments Corp.Instructions:As noted by the table, some of the LabView Drivers support more than one product....

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Hot Fix: MET/CAL version 10.1.0 Hot Fix (.zip)Documents:MET/CAL version 10.1.0 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.For additional information on applying this Hot Fix, see the following article on our support knowledge base: How to Get and Apply the MET/CAL 10.1.0 Hot FixCurrent MET/CAL Customers:The MET/CAL 10.1.0 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include...

GFSTools PC Based Software (.exe)TITLEVERUSE WITHGFSTools™1.012010.12.03GFS 2102DescriptionGFS Tools is a PC based application used to operate the GFS 2102 Gravimetric Flow Standard.  SummaryGFS Tools is the PC based interface to the GFS 2102. All necessary features are included to log data for up to 2 DUTs in comparison to the GFS from 1 sccm of N2 to 10 slm of N2. Options are provided to set manual or automatic flows using an MFC and to define a test sequence of flow points to fully automate...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

COMPASS for Flow PC Based Software (.exe)Additional Downloads:COMPASS for Flow, PC Based Software, Demo (.exe)COMPASS for Flow, PC Based Software, Upgrade (.exe)Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Flow™5.1.0molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC SwitchboxCOMPASS for Flow uses an on line HTML help system that is installed with the program. Install and run COMPASS...

CI Editor PC Based Free Utility (.exe)Additional Downloads:Mensor 400 CI Definition (.ci)Mensor 600 CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)Ruska 6000 CI Definition (.ci)All Ruska models that support the SCPI command syntax (.ci)TITLEVERUSE WITHDOCUMENTSCI Editor™1.002009.03.06PPC4See CI Editor [Help] menu to access the help system.Instructions:The CI Editor is used to maintain CI Definitions for the PPC4.Download and run the file. The...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

9170 Firmware (.zip)Additional Downloads:9171 Firmware (.zip)9172 Firmware (.zip)9173 Firmware (.zip)Title:917X FirmwareVersions:9170: Ver. 1.209171: Ver. 1.209172: Ver. 1.209173: Ver. 1.20Use with:All 9170, 9171, 9172 and 9173Date Modified:1/1/2012Download Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial...

9142 US/EU ver 1.35 firmware update (.zip)Additional Downloads:9142 Asia ver 1.35 firmware update (.zip)9143 US/EU ver 1.35 firmware update (.zip)9143 Asia ver 1.35 firmware update (.zip)9144 US/EU ver 1.35 firmware update (.zip)9144 Asia ver 1.35 firmware update (.zip)Download appropriate file from above. See "Instructions" below to determine correct file. Title914x Ver 1.35 UpdateVer1.35/1.35Use withAll 9142/9143/9144 Field Metrology Wellswith internal reference readout (–P option)Date Modified18-May-2012Description...

4181 Firmware Update (.zip)Title:4181 Firmware UpdateVer:1.14/1.15Use with:4181Date modified:04/22/2021Description of the change:Firmware updated to support a Heater reconfiguration due to excessive heater damage. This fix reduces the maximum duty cycle of the Gradient heaters during Ramp as well as at Steady state conditions. This is used in conjunction with hardware changes to Heater and insulation configuration.Recalibration of unit is not required with this update when using the initial Block...

4180 Firmware Update v. 1.14 (.zip)Title:                  4180 Ver 1.14 UpdateVer:                    1.14/1.10Use with:           4180Date Modified:  03/07/2013Description of the change:  Firmware updated to fix a bug found in the SetPt menu screen when operating the F4 disable key in release Vers 1.13/1.10.Changed the unit operation to use the Emissivity from the active program when operating a program. Recalibration of unit is not required with...

1620A Firmware Update v. 1.15 (.exe)Title:1620A Firmware UpdateVer:1.15Use with:All 1620ADate Modified:7/23/2013Description of the change: NoneDownload Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial port on the computer. Note: If your computer only has USB serial interface, an adapter from USB...

1529 Firmware Update v. 2.04/1.00 (.zip)Title:                  1529 Main FirmwareVer:                    2.04/1.00Use with:           1529Date Modified:  9/5/2012Description of the change: NoneDownload Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N (Recalled Cable). We have received your information, and your order is in process. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have...

Fluke’s assortment of clamp meters has been engineered to address a wide variety of needs, from routine tasks to specialty projects.

To upgrade your 729 to the latest firmware, follow these simple instructions: Download Fluke−729 Version firmware upgrade and save the firmware upgrade file. Ensure your Fluke 729 is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 729 while the update is in progress. Version 0.54 adds the following enhancements: Allows you to increase the accuracy of automatic...

Inscríbase en el programa de socios de formación de Fluke para obtener un 25% de descuento en productos y materiales, y disfrutar de la posibilidad de conseguir becas de Fluke* Nos hemos asociado con colegas, centros de formación profesional y técnica y programas de formación para llevar la información de aplicaciones y los instrumentos más actualizados a las aulas. Recibir los materiales GRATIS Presentaciones de PowerPoint Notas de aplicación y casos prácticos CD, DVD y carteles Envío...

 For use with Fluke 120B Series or 190 Series III ScopeMeter® Test Tools, and MDA-510 and MDA-550 Motor Drive Analyzers.Application software for download, analysis and reporting. This is a demo version with limited functionality.The full version can be obtained with activation key that is available as an option.64bit OS: FlukeView-2 for ScopeMeter® Test Tools version 3.2.0 (.exe) »32bit OS: FlukeView-2 for ScopeMeter® Test Tools version 3.2.0 (.exe) »For a list of improvements associated...

Fluke 753 and 754 Documenting Process Calibrator Firmware UpgradeTo upgrade your 753 or 754 to the latest firmware, follow these simple instructions:Download firmware version 1.06 or 1.16 depending on which firmware your calibrator is currently using, and save the firmware upgrade file.For calibrators currently running firmware versions 1.00, 1.01, 1.02, 1.03, 1.04 or 1.05 download firmware V1.06 (.exe)For calibrators currently running firmware versions 1.10, 1.11, 1.13, 1.14 or 1.15 download firmware...

La garantía de por vida cesa siete años después de que Fluke deje de fabricar el producto, pero el periodo de garantía dura al menos diez años desde la fecha de compra. * (La garantía de por vida se aplica a los productos fabricados después de octubre de 1996). La garantía no cubre manuales, fusibles, baterías desechables, daños por negligencia, mala utilización, contaminación, alteración, accidente o condiciones anómalas de funcionamiento o manipulación, incluidas las averías causadas por el uso que se haga sin seguir las especificaciones del producto, o el desgaste normal de los componentes mecánicos. Esta garantía está a nombre del comprador original y no es transferible. Esta garantía cubre la pantalla LCD únicamente durante 10 años (tecnología avanzada para pantallas LCD). Para determinar la propiedad original, se necesita una prueba de compra. (Modelos 20, 70, 80, 170, 180 y 280).

Calibración de productos Recibirá su instrumento Fluke nuevo, listo para comenzar a usarlo de inmediato y con un certificado de calibración trazable. Si trabaja en una contrata gubernamental regulada por la normativa ISO 9000 y las normativas de la FDA, o si es una de las numerosas empresas que exigen trazabilidad en procesos de medida, permítanos ahorrarle tiempo. Solicite su nuevo multímetro digital, instrumento de medida ScopeMeter®, analizador de calidad eléctrica u otro instrumento Fluke...

La disponibilidad de piezas de repuesto es un factor clave a la hora de realizar una devolución rápida y ofrecer asistencia del producto para clientes que llevan a cabo su propio mantenimiento. Al proporcionar piezas de calidad, lo ayudamos a que sus productos Fluke vuelvan a funcionar con el máximo rendimiento. Todas las piezas de repuesto están garantizadas frente a defectos de material y mano de obra durante los 90 días posteriores al envío. Nuestros repuestos cumplen los estándares de...

P: ¿Por qué el multímetro no marca cero en el modo de tensión de CA?   R: Si se trata de un multímetro de CA de verdadero valor eficaz, como los modelos 17X u 8X, no marca cero ni debería hacerlo. La mayoría de estos multímetros de verdadero valor eficaz cuentan con una especificación de nivel de corriente y tensión de CA mínimos para los modos de corriente de CA y de tensión de CA, normalmente con una especificación del 3 % al 5 % del rango. Si se aplica una señal por encima...

Manage your instruments and your calibration data with this easy-to-use instrumentation management database.

Muchas plantas aún funcionan con una estrategia de mantenimiento del tipo "hasta que deje de funcionar". De este modo, no se aplican medidas hasta que la maquinaria falla; por lo que el personal de mantenimiento va de un desastre a otro.

Algunos multímetros digitales de mayor rendimiento, como el 187, el 189 y el 87V de Fluke, incluyen una función de registro que permite a los usuarios capturar eventos de señales mucho más rápidas que la función de mín./máx. normal que se encuentra en muchos DMM. La función de datos rápidos mín./máx. (187, 189) o pico mín./máx. (87V) está restringida a la medición de tensión y corriente.

Inmersiones, caídas, choques o quemaduras: los medidores de Fluke son resistentes como ninguna otra herramienta de pruebas. El secreto radica en un diseño resistente, pruebas extremas y comentarios de los usuarios que nos ayudan a preparar nuestros medidores para lo peor.

Cuando el silbato del lugar de trabajo suena y los usuarios de las herramientas de Fluke se van a casa, saben que el día de trabajo no se ha terminado. Las tareas del hogar están esperando.

¿Está buscando una herramienta de diagnóstico que pueda ahorrarle dinero rápidamente? ¿Una herramienta que lo pueda ayudar a resolver los problemas de mal funcionamiento de los sistemas mecánicos de climatización?

En la parte I de esta corta serie de notas de la aplicación, tratamos los puntos de inspección de los motores durante una auditoría de energía u otro programa relativo a la eficiencia. La parte I cubre la estrategia de eficiencia básica del motor y describe las pruebas y las formas de ahorro de costos con respecto a la tensión y el desequilibrio de la corriente, y también en relación al factor de energía.

Este artículo no le dará razones para reforzarse y dedicar personal específico, tiempo y presupuesto al mantenimiento predictivo. Este artículo trata de cómo conseguir un tiempo productivo excelente con los recursos de confiabilidad y mantenimiento de los que dispone.

Gran parte de las torres de control se construyeron con sistemas de pararrayos. Sin embargo, sí ocurren incidentes graves.

La vibración generalmente antecede a la falla de la máquina y, con frecuencia, usted puede detectarla antes de advertir otros signos de problemas. La vibración misma no es un problema, pero es simplemente la oscilación normal de una máquina y sus componentes.

¿Estaría mal decir que la mayoría de las veces los motores funcionan de manera óptima? Porque verdaderamente, como profesionales de mantenimiento, tenemos una buena noción del rendimiento esperado de nuestros sistemas mecánicos, los comprobamos de forma algo regular por una razón u otra, estamos más o menos conscientes de las cargas que manejan y ponemos atención a su ciclo de vida útil, ya sea por intuición o mediante un programa más formal de gestión de mantenimiento.

Es la base de cualquier programa de seguridad eléctrica: limitar la exposición de los trabajadores a los riesgos eléctricos de descarga y de arco eléctrico. Usar cables y pinzas de medición para sondear el interior de un panel cargado cuando soluciona problemas o realiza el mantenimiento de rutina siempre expone a los trabajadores a cierto peligro.

Quizás haya trabajado como electricista durante un tiempo. O quizás esté empezando. No importa cuánta experiencia tenga, siempre es bueno invertir algunos minutos en pensar cómo terminar el día del mismo modo que comenzó, es decir, sin lesiones.

El sujeto de prueba yace en silencio mientras Mike Meisner conecta los electrodos. Cierra la puerta de la cámara de prueba del transitorio de alta tensión y retrocede. Luego, Mike presiona el botón y envía 8000 voltios a la unidad de prueba.

El calentamiento inductivo, que por lo general ocurre cuando los conductores de fase se dirigen a través de canales de montaje metálicos, soportes o abrazaderas, puede ocasionar fallas catastróficas y mortales en el equipo de distribución y control eléctrico. Los circuitos de mucha demanda se hallan especialmente en riesgo de presentar calentamiento inductivo, ya que la cantidad de calentamiento inductivo es directamente proporcional a la carga aplicada.

En el pasado, los gerentes de instalaciones juzgaban el estado de la calidad de la alimentación eléctrica en sus instalaciones en función de si las luces estaban encendidas o no. Si las luces estaban encendidas, la calidad eléctrica era buena. Si las luces estaban apagadas y los ocupantes se quejaban, la calidad eléctrica era mala.

La tendencia actual en la automatización de plantas industriales es la sustitución de los esquemas de control tradicionales, en los que cada dispositivo tiene su propio cableado de control, por sistemas de bus que enlazan varios dispositivos mediante el mismo cable. Una de las ventajas de un bus de comunicaciones es que requiere una menor cantidad de hilos y cables para conectar los diversos dispositivos a sus controladores.

Comprender la relación entre la temperatura de bulbo seco, la temperatura de bulbo húmedo, la humedad relativa y la temperatura de rocío es fundamental en todos los aspectos de la climatización. Estos procesos psicrométricos tienen un papel especialmente importante en la integridad del edificio y de los materiales, la salud y la comodidad de los ocupantes, así como la calidad del aire de interior en general.

Un primer vistazo: esta introducción a los osciloscopios de almacenamiento digital (OAD) le ofrece un recorrido rápido pero exhaustivo por las funciones y mediciones de los OAD.

Un flujo de aire adecuado en los conductos de un sistema de climatización es esencial para el correcto rendimiento del equipo. Si los flujos de aire no fueran los apropiados, el aire no se acondicionaría según los fines para los que se diseñó el equipo, los costos de funcionamiento serían elevados y la esperanza de vida del aparato se vería reducida.

Dave Staveteig, técnico jefe de hielo de USA Curling, usa el termómetro IR Fluke 62 para comprobar la temperatura de una piedra de curling. La temperatura es un factor esencial en la interacción entre el hielo y las piedras de granito.

Descargar la actualización del firmware Fluke 744 v4.03/4.53 (.exe) Esta actualización del firmware incluye soporte de Fluke 744 HART para: Transmisor de presión ABB/Kent Taylor 600T v5.3 Transmisor de presión Foxboro I/A v5.2 Transmisor de presión Honeywell ST3000 v6.4 Transmisor de temperatura Rosemount 3144 v5.4 Transmisor de temperatura Rosemount 644 v5.7 Transmisor de presión Rosemount 3051C v5.7 La actualización se realiza en un equipo con Windows con el 744 conectado a través de...