Earth ground testing resources

Grouding Blog TOC image

Safety videos

All grounding articles

Article

Why grounding is so much more important than most people think

Grounding errors can cause electrical shock, fires, equipment damage, and power quality problems that can cause systems, circuits, and equipment to operate improperly.

Article

The hidden hazards of ground faults in PV systems

Why DC ground faults in PV systems are hidden hazards you need to detect before it’s too late. Find the blind spots in PV systems. Solar ground fault troubleshooting.

Article

Why Ground, Why Test?

Poor grounding contributes to unnecessary downtime, but a lack of good grounding is dangerous and increases the risk of equipment failure. Without an effective grounding system, you could be exposed to the risk of electric shock, not to mention instrumentation errors, harmonic distortion issues, power factor problems and a host of possible intermittent dilemmas. If fault currents have no path to the ground through a properly designed and maintained grounding system, they will find unintended paths that could include people.

Article

Selective Measurement

Selective testing is very similar to the Fall-of-Potential testing, providing all the same measurements, but in a much safer and easier way. This is because with Selective testing, the earth electrode of interest does not need to be disconnected from its connection to the site! The technician does not have to endanger himself by disconnecting ground, nor endanger other personnel or electrical equipment inside a non-grounded structure.

Article

Stakeless Measurement

The Fluke 1625 earth ground tester is able to measure earth ground loop resistances for multi-grounded systems using only current clamps. This test technique eliminates the dangerous, and time consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations.

Article

Reassessing airport tower lightning protection systems

Reassessing airport tower lightning protection systems with checklist for ensuring reliable lightning protection, with aid of ground resistance

Article

Some grounds for suspicion

Earth ground testing definitions and methods: grounding and bonding, purpose of the earth ground, Fall of Potential test, stakeless ground testing

Article

Measuring Ground Resistance

How to measure ground resistance. When conducting a grounding audit of a central office there are three different measurements required.

Article

Grounding Basics

Grounding Basics

Article

Fall-of-Potential Measurement

Fall-of-Potential Measurement

Article

Soil Resistivity Measurement

Soil Resistivity Measurement

Article

Testing electrical bonds

Expert, Chuck Newcombe, revisits techniques from 1963 for testing the electrical bonds in a grounding system and compares them with today's tools and methods.

Article

Measuring ground loop resistance without stakes

Normal earth ground measurement involves disconnecting parallel grounding rods, "planting" several auxiliary grounding stakes, and using a earth ground tester to calculate the resistance of grounding system electrodes. Sometimes, though, there isn't anywhere to plant the grounding stakes - such as inside a building, at a cell phone substation, or on power pylons. What then?

Article

Grounding separately derived systems

As I promised in my last column, this "Solid Ground" column deals with transformers and grounding. Let's start by addressing some definitions. Opinions differ on the "official" definition of "distribution" transformer.

Article

Earth ground testing for mine sites with Fluke 1625

All mine sites have grounded electrical systems, so that in the event of a lightning strike or utility overvoltage or ground fault, the current would be able to find a safe path to earth or the neutral of the transformer.

Article

Chasing "ghost" trips in GFCI-protected circuits

This issue of "Solid Ground" talks about ground fault circuit interrupters (GFCIs), why they are necessary, and how to troubleshoot GFCI-protected circuits.