Fluke Calibration P3200 Hydraulic Deadweight Tester
Key features
- Pressure ranges to 10,000 psi (700 bar)
- 0.015% of reading accuracy standard (0.008% optional)
- Single or dual piston formats
- Built-in hand pumps standard
- Mounted spirit level with adjustable feet
- Units can be trimmed to local gravity FOC
Product overview: Fluke Calibration P3200 Hydraulic Deadweight Tester
The P3200 models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
Options
PressCal software for pressure calculations and certificate generation
Operating principle
Deadweight testers are the high performance pressure standard for pressure measurement. Utilizing the well proven piston-gauge system consisting of a vertically mounted, precision lapped piston and cylinder assembly, accurately calibrated weight masses (Force) are loaded on the piston (Area), which rises freely within its cylinder. These weights balance the upward force created by the pressure within the system. The pressure is measured when placed on a correctly spinning and floating piston. The total pressure measured is the summation of the weights plus the piston weight carrier assembly.
Instrument base
There are three basic variations in the hydraulic offering; single low pressure, single high pressure and dual piston models. Pressure is generated and controlled by means of a high quality screw press located on the front of the tester. A built-in hand pump is included as standard for all hydraulic models to prime the system and accommodate large volume requirements.
Piston/cylinder assemblies
The piston/cylinder assembly is the heart of each deadweight tester. They are manufactured from materials that provide stability, durability, and low thermal coefficients and distortion. Our experience and knowledge of piston/cylinder production and calibration ensure the precision and performance required for today’s demanding calibration requirements.
Weight masses
Standard weight masses are series 3 nonmagnetic austenitic stainless steel. Each mass is marked with the serial number of the instrument and the nominal pressure value relative to the high or low-pressure piston, when applicable. Optional fractional weights are stainless steel and/or solution heat treated aluminum.
Gravity correction
Gravity varies significantly with geographical location and this variation has a direct effect on the force of the weights and the accuracy of the deadweight tester. Each instrument can be calibrated to local gravity at no extra cost. If unspecified, instruments will be calibrated to Standard Gravity at 980.665 cm/s2.
Specifications: Fluke Calibration P3200 Hydraulic Deadweight Tester
Pressure Ranges | |
Distilled water operated | Ranges to 10,000 psi (700 bar) |
Accuracy | |
Accuracy1 | ±0.015% of reading (±0.008% optional) |
1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range. | |
Materials of Construction | |
Standard weight material | Series 3 non-magnetic austenitic stainless steel |
Weight density | 7.8 g/cm³ |
Optional fractional weights | Solution heat treated aluminum |
Weight density | 2.7 g/cm³ |
Piston material | Tungsten carbide with nickel binder Density- 15.0 g/cm³ |
Cylinder material | Hardened martensitic steel Tungsten carbide (water above 500 psi, 35 bar) |
Thermal coefficients of expansion | Oil piston/cylinder 16.5 ppm/°C Water (above 500 psi, 35 bar) 11 ppm/°C |
General | |
Test port adaptors | 1/8, 1/4, 3/8 and 1/2 NPT or BSP |
Instrument weight | 36 lbs (16 kg) |
Instrument size (W x D x H) | 17.5 x 12 x 8.5 in (440 x 300 x 215 mm) |
Mass set weight (typical) | 80 lbs (36 kg) |
Reservoir volume | 150 cc |
Screw press displacement | 5.5 cc |
Pump displacement | 4.7 cc per stroke |
O-ring seal materials | Buna N as standard, Viton and EPDM available |
Weight Increments | |
Minimum standard weight increments | Up to 500 psi (35 bar): 1 psi (0.1 bar) 500 to 5000 psi (35 to 350 bar): 10 psi (1 bar) 5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar) Model P3112: 1 psi (0.1 bar) |
Optional fractional weights | Up to 500 psi (35 bar): 0.1 psi (0.01 bar) 500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar) 5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar) |
Operating Fluids | |
Operating fluids | Distilled or deionized water |
Options | |
PressCal software | Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments |
Fluids | Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory. |
Models: Fluke Calibration P3200 Hydraulic Deadweight Tester
Pressure range 20 to 700 bar
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3214-BAR SKU: 4185445
- P3214-1 SKU: 3936926
Pressure range 1 to 35 bar
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3211-BAR SKU: 4185357
- P3211-1 SKU: 3885274
Pressure range 10 to 500 psi
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3211-PSI SKU: 4185378
- P3211-3 SKU: 3885295
Pressure range 1 to 35 kgf/cm²
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3211-KGCM2 SKU: 4185369
- P3211-2 SKU: 3885288
Pressure range 100 to 3,500 kPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3211-KPA SKU: 4185384
- P3211-4 SKU: 3885301
Pressure range 0.1 to 3.5 MPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3211-MPA SKU: 4185391
- P3211-5 SKU: 3885312
Pressure range 10 to 350 bar
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3213-BAR SKU: 4185406
- P3213-1 SKU: 3885320
Pressure range 10 to 350 kgf/cm²
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3213-KGCM2 SKU: 4185414
- P3213-2 SKU: 3885335
Pressure range 100 to 5,000 psi
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3213-PSI SKU: 4185423
- P3213-3 SKU: 3885347
Pressure range 1,000 to 35,000 kPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
Pressure range 1 to 35 MPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3213-MPA SKU: 4185438
- P3213-5 SKU: 3885364
Pressure range 20 to 700 kgf/cm²
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3214-KGCM2 SKU: 4185450
- P3214-2 SKU: 3885386
Pressure range 200 to 10,000 psi
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3214-PSI SKU: 4185461
- P3214-3 SKU: 3937031
Pressure range 2,000 to 70,000 kPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
Pressure range 2 to 70 MPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – single PCU
- P3214-MPA SKU: 4185477
- P3214-5 SKU: 3885416
Pressure range 1 to 350 bar
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3223-BAR SKU: 4185489
- P3223-1 SKU: 3937186
Pressure range 1 to 350 kgf/cm²
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3223-KGCM2 SKU: 4185492
- P3223-2 SKU: 3885433
Pressure range 10 to 5,000 psi
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3223-PSI SKU: 4185509
- P3223-3 SKU: 3885440
Pressure range 100 to 35,000 kPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
Pressure range 0.1 to 35 MPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3223-MPA SKU: 4185511
- P3223-5 SKU: 3885478
Pressure range 1 to 700 bar
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3224-BAR SKU: 4185527
- P3224-1 SKU: 3885484
Pressure range 1 to 700 kgf/cm²
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3224-KGCM2 SKU: 4185530
- P3224-2 SKU: 3885491
Pressure range 10 to 10,000 psi
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3224-PSI SKU: 4185548
- P3224-3 SKU: 3937046
Pressure range 100 to 70,000 kPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
Pressure range 0.1 to 70 MPa
Includes:
- Hydraulic Deadweight Tester
- Water operated – dual PCU
- P3224-MPA SKU: 4185553
- P3224-5 SKU: 3937147