Fluke CO-220 Carbon Monoxide Meter
Fluke CO-220 Carbon Monoxide Meter is rated out of 5 by 8.
Key features
- Rugged case and electronics
- Large LCD displays CO levels from 0 to 1000 ppm
- Bright back-light allows easy screen viewing under dim lighting conditions
- Beeper triggers with increasing frequency as CO levels rise
- MAX Hold function stores and displays the maximum CO level
- Automatic sensor zeroing and self-test sequence upon start-up
- CO level beeper can be silenced if desired
- Automatic power-off after 20 minutes extends battery life
- Easy to replace battery
- Replaceable sensor extends tool life
- C50 soft carrying case, battery and instruction sheet
- Stabilized electrochemical CO specific sensor
- Typical two year sensor life; one year calibration cycle
- Battery life typical 500 hours with alkaline battery
- Updated sensor
Product overview: Fluke CO-220 Carbon Monoxide Meter
Quickly and accurately measure CO levels with easy-to-use compact meter
The Fluke CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels with a single compact instrument.
Featuring the newest generation of electrochemical sensors, the CO-220 responds very quickly to ambient changes in carbon monoxide concentration without the use of a pump.
The CO-220 is the perfect instrument for technicians and other professionals who need to measure CO levels within spaces such as industrial environments, commercial buildings, or residential dwellings where accumulation of combustion gas is possible.
Specifications: Fluke CO-220 Carbon Monoxide Meter
| General Specifications | |
| Range | 0 to 1000 ppm |
| Resolution | 1 ppm |
| Accuracy | 5% |
Models: Fluke CO-220 Carbon Monoxide Meter
Rated 1 out of 5 by SpeedyEste from Not worth the Money Bought it a couple years ago maybe used it no more than 10 times and I am sorry to say it no longer works. I have never dropped it or left in my vehicle when not in use. Always leave it in my desk at the office when I'm not planning to use. When we fluke products your hoping that it wont go out so soon ,especially when you spend a great amount of time and money using their products. I would not recommend this product.
Date published: 2023-03-24
Rated 4 out of 5 by Rgr S from NOT COMPLETELY SATISFIED!! I've been in the HVAC business 30 years and have always respected Fluke products. That being said, when my old CO Meter knock out, I went shopping for a new one. Well needless to say, good CO Meters are not on the cheap side of the isle. I decided to go with Fluke for their well known quality. I was very happy to receive my new CO Meter in a timely manner. Setting in my living room checking it out and noticed right away that it would not "0" itself out. Well I thought maybe it will be ok out on the job,
I THOUGHT WRONG!! After it does it's 10 seconds of preparation, IT WILL NOT "0" ITSELF OUT, NO WHERE, NO WAY, NOTTA, NO TIME EVER!!!!! IT STOPS AROUND
8, 9 OR 10 EVERY TIME!!!! NEEDLESS TO SAY I'M NOT HAPPY WITH THIS $500 TOOL NOT WORKING AS IT SHOULD!!!! I CAN ONLY HOPE THAT "FLUKE CORPERATION"
WILL STAND BEHIND THEIR PRODUCT!!! SIGNED BY; A DISSAPOINTED HVAC BUSINESS OWNER!!!
Date published: 2020-08-21
Rated 1 out of 5 by Tyler1234 from Sensor Not Replaceable I have had this meter for a couple years and it has worked great. It recently stopped working. It counts down like normal but then turns off. I am assuming that the sensor needs to be replaced. I opened up the meter and the noticed the sensor just plugs into the main circuit board. I called my local electrical supplier and they informed me that you can not buy a sensor only replace the entire meter at a cost of 655.00CAD. Crazy. I have looked at other manufactures CO meters and most of them seem to have a replaceable sensor.
Date published: 2020-03-20
Rated 1 out of 5 by Sniktaw from Not a happy customer Purchased one a couple of years ago and have used it a dozen times or so. Went to use it the other day and it nolonger works. By reading the views it looks like I’m not alone maybe fluke needs to go back to the drawing board with this particular product.
Date published: 2017-12-30
Rated 1 out of 5 by TOM WYSE from FAILED AFTER 1.5 YEARS I PURCHASED THIS METER ON 04/20/15. I USED ABOUT 6 TIMES TOTAL IT WAS KEPT IN A HEATED GARAGE. THE SENSOR FAILED ON IT AND THEY ONLY HAVE A 1 YEAR WARRANTY. THEIR IS NO REPAIR AND TOLD ME TO BUY A NEW METER. HORRIBLE QUALITY I WOULD EXPECT MORE OUT OF A $400 METER THAN 1.5 YEARS. I HAVE ALL FLUKE METERS AND HAVE HAD GOOD SUCESS WITH THEIR PRODUCT. I SPENT 2X MORE FOR THEIR PRODUCT AND I WILL NEVER AGAIN. I WOULD NOT RECOMMEND THIS PRODUCT POOR QUALITY
Date published: 2017-01-12
Rated 5 out of 5 by bobby357 from Fluke Carbon monoxide meter Safety with gas appliances is priority Number 1 and the Fluke meter helps the Hvac tech in making sure the appliances are in safe operating condition.
Date published: 2016-12-07
Rated 1 out of 5 by tminstl from in stl brand new out of box,failed to work,returned for field piece
Date published: 2014-02-03
Rated 5 out of 5 by IceWhiteice from A must for all HVAC Techs I am someone who takes my career and safety of my customers very seriously. For all techs this is an accurate tool to test for the "Silent Killer".
Date published: 2013-07-05