Fluke 789 ProcessMeter™

  • Fluke 789 ProcessMeter™
  • Fluke 789 ProcessMeter™
  • Fluke 789 ProcessMeter™
  • Fluke 789 ProcessMeter™

คุณลักษณะสำคัญ

  • Compact digital multimeter and mA loop calibrator solution
  • Full-featured mA loop calibrator with built-in 24v Loop Power
  • Quickly and easily troubleshoot every part of a control loop
  • Large, bright dual-measurement display

ภาพรวมผลิตภัณฑ์: Fluke 789 ProcessMeter™

Fluke 789 ProcessMeter™ doubles your troubleshooting power

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.

The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

Do a lot more while carrying a lot less

The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.

Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.

Accuracy

This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.

ข้อมูลจำเพาะ: Fluke 789 ProcessMeter™

Specifications
Current measurementRange0-1 A AC or DC
Resolution1 mA
Accuracy0.2% + 2 LSD (DC)
Range0-30 mA
Resolution0.001 mA
Accuracy0.05% + 2 lSD
Current sourcingRange0-20 mA or 4-20 mA
Resolution0.05% of span
Drive capability24 V Compliance or 1200 Ω @ 20 mA
Frequencyto 19.999 kHz, 0.005% + 1 LSD
ContinuityBeeps for resistance < 100 Ω
Voltage measurementRange0-1000 V AC (true-rms) or DC
Resolution0.1 mV to 1.0 V
Accuracy0.1% Rdg + 1 LSD (VDC)
Resistance measurementto 40 MΩ, 0.2% + 1 LSD
Diode test2.0 V shoes diode voltage drop
Display current and % of spanYes
Auto Step, Auto RampYes
Environmental Specifications
Operating temperature-20°C to 55°C
Storage temperature-40°C to 60°C
Humidity (without condensation)95% up to 30°C
75% up to 40°C
45% up to 50°C
35% up to 55°C
Temperature coefficient0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)
Safety Specifications
Electrical safetyDesigned in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
Overvoltage categoryIEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V
Maximum voltage1000 V RMS
Mechanical and General Specifications
Size (H x W x L)50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in)
Weight610 g (1.6 lbs)
Batteries4 AA alkaline batteries
Warranty3 years
Battery life140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock and vibrationRandom, 2 g, 5-500 Hz
1 meter drop test

รุ่น: Fluke 789 ProcessMeter™

Fluke 789
Fluke 789 ProcessMeter™

Includes:

  • AC175 Alligator Clips
  • Four (4) AA 1.5 V alkaline batteries (installed)
  • TL71 safety-designed test lead set