Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

  • Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

Nyckelfunktioner

Fluke 62 MAX+. Small in size. Big on toughness.

  • Dust and water-resistant: IP54 rated.
  • Rugged: 3-meter (9.8-foot) drop tested.
  • Ergonomically designed: Completely redesigned for a more natural hand fit.
  • Distance to spot: 12:1.
  • Dual lasers: Identifies area to be measured.
  • Large, backlit display: Makes data easier to read, even in dark areas.

Fluke 323 True-rms Clamp Meter.Rugged. Reliable. Precise.

  • 400 A AC current measurement.
  • 600 VAC and DC voltage measurement.
  • True RMS AC voltage and current for accurate measurements on non-linear signals.
  • Resistance measurement up to 40 kΩ with continuity detection.
  • Slim, ergonomic design.
  • CAT IV 300V/CAT III 600 V safety rating.

Fluke 1AC II VoltAlert™ Voltage Detector

  • Voltbeat™ technology and continuous self-test, so always know it’s working.
  • Upon detection, tip glows and beeper sounds.
  • Voltage detection of 90 to 1000 VAC.
  • CAT IV 1000 V for added protection.

Fluke C115 Soft Case

  • Lightweight soft case to provide optimal protection and accessory storage.

Produktöversikt: Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem

Specifikationer: Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature range-30°C to 650°C (-22°F to 1202°F)
Accuracy±1.0°C or ±1.0% of reading, whichever is greater
-10°C to 0°C: ±2.0
-30°C to -10°C: ±3.0
Response time (95%)< 300 ms (95% of reading)
Spectral response8 to 14 microns
Emissivity0.10 to 1.00
Optical resolution12:1 (calculated at 90% energy)
Display resolution0.1°C (0.2°F)
Repeatability of readings±0.5% of reading or < ±0.5°C (1°F), whichever is greater
PowerAA battery
Battery life8 hours with laser and backlight on
Physical Specifications
Weight255 g (8.99 oz)
Size175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
Operating temperature0°C to 50°C (32°F to 122°F)
Storage temperature-20°C to 60°C (-4°F to 140°F), (without battery)
Operating humidity10% to 90% RH non-condensing at 30°C (86°F)
Operating altitude2000 meters above mean sea level
Storage altitude12,000 meters above mean sea level
IP ratingIP 54 per IEC 60529
Drop test3 meters
Vibration and shockIEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMCEN 61326-1:2006 EN 61326-2:2006
Standards and agency approvalComplianceEN/IEC 61010-1: 2001
Laser safetyFDA and EN 60825-1 Class II

Fluke 323 True RMS Clamp Meter

Specifications
AC currentRange400.0 A
Accuracy2% ±5 digits
(45 Hz to 65 Hz)
2.5% ±5 digits
(65 Hz to 400 Hz)
AC voltageRange600.0 V
Accuracy1.5% ±5 digits
DC voltageRange600.0 V
Accuracy1.0% ±5 digits
ResistanceRange400.0 Ω/ 4000 Ω
Accuracy1.0% ±5 digits
Continuity≤ 70 Ω
AC responseTrue-rms
Data holdYes
SizeH x W x D (mm)207 x 75 x 34
Max wire diameter30 mm (600 MCM)
Weight265 g
Category ratingCAT III 600 V
CAT IV 300 V
WarrantyTwo-year

Fluke 1AC-II VoltAlert

Specifications
Operating principleSenses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing rangesNominally, 90 VAC to 1000 VAC or 200 VAC to 1000 VAC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip styleBlade or round, depending on model
Light sourceOne high intensity red LED
Agency approvalsc CSA us, CE, C-Tick
Safety rating1000 V, CAT IV
IP ratingIP 40
Operating temperature-10°C to 50°C
Operating humidity ranges0% to 95%(0°C to 30°C)
0% to 75%(30°C to 40°C)
0% to 45%(40°C to 55°C)
Operating altitude3000 meters
Batteries2 AAA alkaline batteries included
Product does not respond to random electrostatic discharge.

Modeller: Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

Fluke 62 MAX+/323/1AC Kit
Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

Köp den

Includes:

  • Fluke 62 MAX+ IR Thermometer
  • Fluke 323 True-rms Clamp Meter
  • Fluke 1AC II VoltAlert Voltage Detector
  • C115 Soft Case