Fluke 2AC Non-Contact Voltage Tester
Fluke 2AC Non-Contact Voltage Tester is rated out of 5 by 46.
Key Features
- Non-contact voltage detection from 90 to 1000 V AC
- Innovative 'Battery Check' ensures battery is in good condition*
- Integrated clip design, optimized for pocket storage
Product overview: Fluke 2AC Non-Contact Voltage Tester
Always on for faster, safer voltage testing
The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. *
Your first-choice tool for go/no-go testing
The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.
- CAT IV 1000 V overvoltage rated product for best in class user protection
- Suitable for a wide range of residential, commercial and industrial needs
- Fluke ruggedness and reliability with a two-year warranty
* Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.
Specifications: Fluke 2AC Non-Contact Voltage Tester
| Specifications | |
| Operating Principles | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage. |
| Safety Compliance | Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 |
| EMC Compliance | Meets IEC 61326-1:2006 |
| Operating | 90 V AC to 1000 V AC, CAT IV 1000 V rated |
| Temperature (Operating and Storage) | -10°C to 50°C (-14°F to 122°F) |
| Operating Humidity Ranges | 0% to 95% (0°C to 30°C) |
| 0% to 75% (30°C to 40°C) | |
| 0% to 45% (40°C to 55°C) | |
| Altitude | 2000 m (CAT IV 1000 V) |
| Cleaning | Clean with damp cloth |
| Battery Life | Typical battery life of greater than one year |
| Warranty Period | Two years |
Models: Fluke 2AC Non-Contact Voltage Tester
FLK2AC/90-1000V
Fluke 2AC VoltAlertTMElectrical Tester
90-1000V, straight tip for North American style outlets
90-1000V, straight tip for North American style outlets
Rated 2 out of 5 by billn from Defected 2AC I Do not recommend the 2AC It lite up just holding it in the air or on wood. I used to have a 1ac that work flawlessly. I used it for years. Send the 2AC back to Amazon.
Date published: 2022-01-31
Rated 5 out of 5 by MCSPatrick from 1st Line of Defense I never go to work without this in my pocket/toolkit.
Date published: 2022-01-19
Rated 4 out of 5 by PanPap from Nice tool Hello. I just bought the Fluke 2AC. I am a physics teacher and use it at home and lab cases ( discontinuing wires and things like that). Although it is a great tool it lights up when I put it near metal surfaces although voltage is not present - as if E/M waves are reflected or something like that. It even lights up when I put it near my mac's keyboard or the microwave chassis. Is there some kind of sensitivity calibration that is needed?
Date published: 2021-04-29
Rated 5 out of 5 by Anonymous from Good quality and fast delivery. I have several of your products and have found them extremely relievable.
Date published: 2021-03-02
Rated 4 out of 5 by BillW from Works Great with 1 exception! Users should be reminded that childproof outlets will not indicate voltage unless a blade enters neutral slot simultaneously with a blade in the "hot" slot.
Date published: 2020-12-11
Rated 5 out of 5 by Anonymous from 2AC tester This instrument should be used by someone who has a knowledge of electricity
Date published: 2020-12-09
Rated 4 out of 5 by Tom in Tucson from works like a charm The Volt Alert 2AC works fine. My only complaint is that unscrewing and re-screwing the barrel to replace the batteries is a little rough, as if the battery return wire is catching on something. Voltage detection works fine and I am basically happy with the units operation.
Date published: 2020-12-08
Rated 5 out of 5 by G Evanick from Fluke 2AC Voltage Tester is Well Designed Simple and convenient to use and like that uses common household batteries rather than unique ones.
Date published: 2020-12-08
Rated 1 out of 5 by Anonymous from Junk Get the same thing at Cambodian tire for 11$ lol works just about as good lol
Date published: 2020-12-01
Rated 1 out of 5 by Santiafo from Does not work I Just recibes the voltalert. But it doesn't work correctly. I live in a city with an altitude above 3500m. Is it a reason for not working?
Date published: 2018-10-23
Rated 2 out of 5 by Humu Humu from 1 Flaw I just got my 2AC/90-1000V unit. I have a Fluke 787 ProcessMeter provinding me loop-current (24VDC) to my PLC anlog input module. The pen tip stays lit when it makes contact to the meter-leads. (??) When checking outlets and power cords, it seems to work right. So, why does it stay lit with 24VDC loop power?
Date published: 2017-02-06
Rated 5 out of 5 by bakermc from Great and cool tool for every family! I've owned and used this product for a few years and loved it very much. It has helped me a lot to test my house wall plugs and power lines to check whether there is power or not. It's so easy to use and always gives me a peace of mind before I touch or fix the plugs or lines. I have also used this tool to diagnose broken Christmas lights to pin-point which light is burned out, especially when the light decoration is very long. Highly recommend to anyone who needs to deal with any power issue around one's house!
Date published: 2016-12-19
Rated 4 out of 5 by jar31head from only volt alert i would use I am a industrial maintenance electrician, and I have had several voltage detectors. This is what I use everyday. If you need one, I highly recommend these.
Date published: 2016-12-10
Rated 5 out of 5 by NYCElec1 from It Just Works I've been carrying this 2AC tester daily instead of the classic 1AC-A that I normally carry. Not needing to "turn on" the tester has been very convenient and the lens flashing red upon movement confirms there is battery power remaining.
Date published: 2016-12-07
Rated 5 out of 5 by Paco0113 from The Best I'm been using this for a while and I love it easy to use very reliable and must have tool
Date published: 2016-12-07
Rated 5 out of 5 by joseph nova from best non contract voltage tester on the market I have used the 2-AC non contact voltage tester for over ten years. Even after repeated drops and bumps they keep on working. I have never had one that didn't detect voltage when there was voltage in the circuit. Sometimes the tester shows voltage when there is none but that just means I need to double check with my meter- which happens to be the fluke T+Pro electrical tester. It's a tough pair to beat.
Date published: 2016-12-07
Rated 4 out of 5 by Fox Engineer from Good Factory Tool We use this in our production line to test high voltage equipment. Small, lightweight and clips into your pocket so it does not fall out. Buy it.
Date published: 2016-12-07
Rated 4 out of 5 by Davemc15 from Easy to use As an industrial electrician the Fluke 2AC Voltalert has helped out immensely. Easy to use. Accurate and tough are a few of the adjectives to describe it!
Date published: 2016-12-07
Rated 5 out of 5 by kwh22 from perfect for a sure and safe circuit We sell these all the time to our contractors. They like the product for the value and the performance. It is a standard for most electricians. I have one at home too. Very useful tool.
Date published: 2016-12-07
Rated 1 out of 5 by Do Not Buy from Poor 220v response. No beep. Description reads audible/beep, but no sound at all when near power. Also, does not properly detect 220v. Just a single very quick LED flash. Unusable tester.
Date published: 2016-09-01
Rated 4 out of 5 by Dave Marks from Good but not 5 stars! The directions for use that come with this instrument are flawed and the most important directions are not even included. The tip of this detector should be inserted into the SHORT (rectangular) slot of the 3-hole receptacle.
If it is inserted into the short slot (which is the HOT slot), then it will shine bright red if the receptacle is live, and the light will stay on until you pull the tip out.
If you insert the tip into either the round/ground hole or the long slot (which is not hot), the only way this detector works is when you pull OUT the tip, and then you will see just a red flash. By the way, the round ground "slot" and the short, upper slot are tied together internally, and neither is hot.
The other reason I can't give this product five stars, is that the tip appears to be likely to break off with repeated use, so you have to be careful and insert it and withdraw it without bending it side to side.
Date published: 2015-02-26
Rated 5 out of 5 by Premise Inspections from Fantastic for building inspections Great product we use it for safety, We test taps and foil roof insulation when completion building inspections.
Date published: 2015-01-30
Rated 5 out of 5 by twogigahz from Indespensible This is the perfect device to troubleshoot bad strings of Christmas bulbs!! Easily identifies the last live bulb in the string so you can isolate the failure. Worth its weight in gold at this time of year, and keeps me from losing my mind.....!!!!
Date published: 2014-12-03
Rated 1 out of 5 by DisappointednFluke from Light Undependable The light comes on when moving the tip away from anything whether electricity is present or not. I could not find a way to contact Customer Service via web or email and I choose not to waste time in Fluke's telephone system waiting for assistance.
Date published: 2013-12-08
Rated 4 out of 5 by Fluke111 from Time saver I like this little tester,it's fast and good to have in the tool bag.
Date published: 2013-05-15
Rated 1 out of 5 by GreenelectronUSA from this device do not work with tamper proof receptacle !!! after start using new tamper proof outlets , this tester is already obsolete.
also give sometimes false measurements.
i do not recommend.
Date published: 2012-11-30
Rated 2 out of 5 by razmik from it is just red light it doesnot have the beep it means it is just the red light
Date published: 2012-07-20