Fluke 729 Automatic Pressure Calibrator
Fluke 729 Automatic Pressure Calibrator is rated out of 5 by 7.
Key Features
- Automatic pressure generation and regulation to 300 psi
- Configure procedures for pressure transmitters and switches
- Measure, source, and simulate 4 to 20 mA signals
- Troubleshoot and calibrate HART smart transmitters
- Automatically document test results
Product overview: Fluke 729 Automatic Pressure Calibrator
Portable automatic pressure calibrator simplifies pressure calibration
The Fluke 729 Automatic Pressure Calibrator has been designed specifically with process technicians in mind to simplify the pressure calibration process and provide faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever with an internal electric pump that provides automatic pressure generation and regulation in an in an easy-to-use, rugged, portable package.
The ideal portable pressure calibrator, the 729 allows you to simply type in a target pressure, and the calibrator will automatically pump to the desired set-point. Then, internal fine adjustment control automatically stabilizes the pressure at the requested value.
The Fluke 729 can also automatically test multiple pressure test points and automatically document the results. Calibration is as easy as typing in the starting and ending pressure and the number of test points and tolerance level. The 729 does the rest.
Built-in HART communication capabilities enable HART transmitter mA adjustments, light HART configuration and the ability to adjust to applied 0% and 100% values.
Upload and manage documented calibration results with DPCTrack2™ Calibration Management Software, making it easy to manage your instrumentation, create scheduled tests and reports, and manage calibration data.
With three ranges to choose from, 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), Fluke 729 Automatic Pressure Calibrators are designed to perform when and where you need them.
What's in the box:
- Fluke 729 Automatic Pressure Calibrator
- Li-Ion battery charger and adapters
- Quick-Connect pressure fitting, hose and adapter starter kit
- (1 pair) Stackable test leads
- (1 set) AC280 SureGrip™ hook clips
- (1 set) AC175 alligator clips
- (1 pair) TP220 test probes (red, black)
- USB communication cable
- TPAK ToolPak™ Magnetic Meter Hanger Carrying case with shoulder strap and accessories pouch
- DPCTrack2™ trial calibration management software
- Traceable certificate of calibration
- Quick Reference Guide
- 3-year warranty
Specifications: Fluke 729 Automatic Pressure Calibrator
| Pressure specification* |
| One-year specification 0.02% of full scale |
| Control specification 0.005% full scale minimum |
| *See manual for detailed specifications |
| Model | |||||||||
| 729 30G |
| ||||||||
| 729 150G |
| ||||||||
| 729 300G |
| ||||||||
| 729 30G FC |
| ||||||||
| 729 150G FC |
| ||||||||
| 729 300G FC |
| ||||||||
| 729CN 200K |
| ||||||||
| 729CN 1M |
| ||||||||
| 729CN 2M |
| ||||||||
| 729CN 200K FC |
| ||||||||
| 729CN 1M FC |
| ||||||||
| 729CN 2M FC |
| ||||||||
| 729JP 200K |
| ||||||||
| 729JP 1M |
| ||||||||
| 729JP 2M |
| ||||||||
| 729JP 200K FC |
| ||||||||
| 729JP 1M FC |
| ||||||||
| 729JP 2M FC |
| ||||||||
| Electrical specification | |
| All specifications are valid to 110% of range, except 24 mA source and simulate which are valid to 100% of range. | |
| Ranges | |
| mA measure, source and simulate | 0 mA to 24 mA |
| Volts dc measure | 0 V dc to 30 V dc |
| Resolution | |
| mA dc source, simulate and measure | 1 μA |
| Voltage dc measurement | 1 mV |
| Accuracy | 0.01% ±2 LSD all ranges (at 23 °C ±5 °C) |
| Stability | 20 ppm of full scale /°C from -10 °C to +18 °C and 28 °C to +50 °C |
| mA simulate external voltage requirement | 12 V dc to 30 V dc |
| Loop compliance voltage | 24 V dc @ 20 mA |
| mA simulate external voltage requirement | 12 V dc to 30 V dc |
| Temperature measurement only/100 Ω Pt(385) RTD | -50 °C to 150 °C (-58 °F to 302 °F) |
| Temperature resolution | 0.01 °C (0.01 °F) |
| Temperature accuracy | ±0.1 °C (0.2 °F) ±0.25 °C (±0.45 °F) combined uncertainty when using 720 RTD probe (optional accessory) |
| Drive capability | 1200 Ω without HART resistor, 950 Ω with internal HART resistor |
| Mechanical specification | |
| Size (HxWxL) | 7 x 27.94 x 17.27 cm (2.75 x 11 x 6.8 in) |
| Weight | 6.5 lbs., 2.95 kg |
| Ingress protection | IP54 |
| Environmental specification | |
| Operating temperature | -10 °C to 50 °C for measurement, 0 °C to 50 °C for pressure control |
| Operating temperature with battery | -10 °C to 40 °C |
| Battery will only charge to 40 °C | |
| Storage temperature | -40 °C to 60 °C |
| Operating altitude | 3000 m |
| Storage altitude | 13000 m |
| Wireless (729 FC only) | |
| Radio frequency certification | FCC ID: T68-FBLE IC:6627A-FBLE |
| Wireless radio frequency range | 2412 MHz to 2462 MHz |
Models: Fluke 729 Automatic Pressure Calibrator
FLK-729 30G
Fluke 729 Automatic Pressure Calibrator 30 psi, 2 bar range, no wireless communication
FLK-729 150G
Fluke 729 Automatic Pressure Calibrator 150 psi, 10 bar range, no wireless communication
FLK-729 300G
Fluke 729 Automatic Pressure Calibrator 300 psi, 20 bar range, no wireless communication
FLK-729 30G FC
Fluke 729 Automatic Pressure Calibrator 30 psi, 2 bar range, includes wireless communication for Fluke Connect
FLK-729 150G FC
Fluke 729 Automatic Pressure Calibrator 150 psi, 10 bar range, includes wireless communication for Fluke Connect
FLK-729 300G FC
Fluke 729 Automatic Pressure Calibrator 300 psi, 20 bar range, includes wireless communication for Fluke Connect
FLK-729CN 200K
FLK-729CN 1M
FLK-729CN 2M
FLK-729CN 200K FC
FLK-729CN 1M FC
FLK-729CN 2M FC
FLK-729PLUS 2M
FLK-729PLUS 1M
FLK-729PLUS 200K
Is there a way to create a custom calibration task. ie. Make a pressure switch test that will perform a decreasing pressure test to check a PSL setpoint, and also repeat the task 3 times for repeatability. Please do not direct me to contact tech support.
With the Fluke 729 Automatic Pressure Calibrator you can only create a task with an increasing pressure switch test.
Date published: 2024-04-26
Please tell me what is the resource of the automatic pneumatic pump in the 729 model? How many cycles before the repair of an electric pump?
Please reach out to the relevant Fluke technical support for your country here: https://www.fluke.com/en-us/support/technical-support.
Date published: 2024-04-11
Where can you buy a replacement battery charger and adapters
Reach out to a Fluke sales expert about selecting the right product for your needs at 877-864-5880. The Fluke 729 Automatic Pressure Calibrator is compatible with the BP729, Rechargeable Li-ion Battery (part number 4817068) and Power Charger, AC/DC (part number 4878453). Other parts and accessories are available.
Date published: 2024-05-23
How do you calibrate a low pressure switch with the 729? You can set an increasing pressure for a high pressure switch but I can't figure out how to set a decreasing pressure setpoint.
Please contact Fluke's tech support team at tech.support@fluke.com or 800-443-5853.
Date published: 2024-11-05
When connecting an external 750 pressure module, will the calibrator still perform the auto pump functionality if the external pressure module is of lower pressure than the pump. ex. switch test using 0-1PSI external pressure module.
Yes, the 729 30G calibrator can perform the auto pump functionality, but will need an external hand pump to test lower pressures if using the 729 150G or 729 300G.
Date published: 2023-05-11
Rated 1 out of 5 by Shotcaller from Juice not worth the sqeeze We use this once a year and the 2nd year the charging port failed. So we have to physically take the battery out to charge it. 3rd year the pump failed. Big price tag to fix it. Told us there was dirt in it. For the price tag these units should be more robust and not fail due to a little dust. This unit looks brand new still and I can assure you it does not get dirty. User beware
Date published: 2024-09-12
Rated 1 out of 5 by Big P in the V from Not worth $12,000 Tested the unit for field service and pump functionality fails even with proper care and maintenance. Had it calibrated with a subcontractor rather than with Fluke due to pricing. Support teams are also unsatisfactory.
Date published: 2024-02-08
Rated 1 out of 5 by sioneeg from Terrible quality, keep failing About a 40% failure rate inside 2 years. Unbelievable
Date published: 2023-09-05
Rated 5 out of 5 by TMyers from Fast and Easy to Use The internal pump makes this tool invaluable for pressure calibrations. The built in HART functions remove the need for a HART calibrator 99% of the time. The internal pump speed is fast, 0-150 in less than a minute.
Date published: 2020-02-07
Rated 4 out of 5 by PatC from Love the unit however it has a bug Great piece of gear for the low psi transducers we have and need to calibrate. Really good gear for quick and nimble Changes.
One beef I have with this unit is when we try to upload the reports. It will convert our output signal to amps instead mA throwing the tolerance out by 50000%
Makes all our tests fail when they passed in the field.
Fluke told us it's a bug. It's preventing us buying another unit.
Date published: 2018-12-14
Rated 1 out of 5 by IC Tech from Slow pump I agree with previous review the pump is really slow. Even doing 150psi and when I tested 2 150psi switches it shutdown. I’m positive I wasn’t leaking. Basically after testing 3 switches it took me an hour for a 15min nitrogen bottle test for all 3. For low pressure rosemount transmitters it did awesome. Just not $8k awesome to me. It’s not really practical for a plant application. Also it doesn’t test AC only DC.
Date published: 2018-05-10
Rated 1 out of 5 by terry from super slow pump The pump is way to slow to do many calibrations in a day. To go from 0 to 300 psi is about 4 to 5 minutes. Also the test terminals on a Rosemount transmitter the m/a does not read correctly at full scale, you must be in series.
Date published: 2018-03-07