Fluke Networks Pro3000™ Tone Generator
Fluke Networks Pro3000™ Tone Generator is rated out of 5 by 1.
Key features
- Send tone signal up to 10 miles (16 km) on most cables
- Analog tone generator with bed-of-nails clips
- SmartTone™ provides 5 distinct tones for exact pair identification
- Continuity testing and line polarity confirmation
- Tone can be traced by a compatible analog probe (sold separately)
Product overview: Fluke Networks Pro3000™ Tone Generator
The Pro3000™ unfiltered toner, for use on inactive networks, uses SmartTone™ technology, with five different tones to allow the technician to easily identify individual pairs. Angled-bed-of-nails clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks.
Specifications: Fluke Networks Pro3000™ Tone Generator
| User interface | Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C, Storage: -40° C to 70° C |
| Case dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
The current version of the toner has a very nice additional cover for the alligator clips when they are not being used. Are these available from Fluke or from other vendors. Would very much like to upgrade my older toners. Thank you. /S/ Mike
Rated 5 out of 5 by Michael 333 from Perfect tool for the job. I purchased this tool to trace electrical circuits and it was the perfect tool for the job.
Date published: 2023-10-21