Fluke i200s AC Current Clamp
Fluke i200s AC Current Clamp is rated out of 5 by 2.
Key features
- Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200 A AC
- Included adapter for DMM's
- Two ranges: 20 A & 200A, 10 or 100 mV/ Amp output
- Take accurate current readings without breaking the circuit
- Max. conductor Ø 20 mm
- CAT III 600V safety rating
Product overview: Fluke i200s AC Current Clamp
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
Specifications: Fluke i200s AC Current Clamp
| Specifications | |
| Nominal current range | 20 A 200 A |
| Continuous current range | 0.1 A - 24 A 0.5 A - 200 A |
| Maximum non-destructive | 240 A |
| Lowest measurable current | 0.1 A |
| Basic accuracy | 1.5% + 0.5 A (48-65 Hz) (% reading + floorspec) |
| Useable frequency | 40 Hz - 10 kHz |
| Output level(s) | 100 mV/A 10mV/A |
| Safety Specifications | |
| Safety | CAT III, 600 V |
| Maximum voltage | 600 V AC |
| Mechanical and General Specifications | |
| Warranty | 1 year |
| Maximum conductor diameter | 20 mm |
| Maximum conductor size (busbar) | 20 x 5 mm |
| Output cable length | 2 m |
| BNC Adapter | Yes |
| BNC to banana adapter included | Yes |
Models: Fluke i200s AC Current Clamp
FLK-i200s
Fluke i200s AC Current Clamp