Fluke 179 True-RMS Digital Multimeter plus insulated hand tools starter kit

Key features

Fluke 179 True-rms Digital Multimeter
3 slotted insulated screwdrivers
2 Phillips insulated screwdrivers
3 insulated pliers
Roll-up tool pouch

Also available with 3 or 5 screwdrivers

Product overview: Fluke 179 True-RMS Digital Multimeter plus insulated hand tools starter kit

The Fluke 179 True-RMS Digital Multimeter with temperature readings is the industry-standard troubleshooting tool for electrical and electronic systems. Combined with the insulated hand tools starter kit, you have the ideal set test equipment and hand tools to tackle most common troubleshooting tasks.

Fluke 179 Digital Multimeter

You can trust the rugged reliable Fluke 179 to get the job done in all of the messy, loud, high energy, and high altitude places you work. Whether you need a multimeter for industrial troubleshooting or electrical and electronic system installation or maintenance, the Fluke 179 with its true-RMS capabilities can do the job. It is independently tested for safe use in CAT III 1000 V, CAT IV 600 V environments and backed by a lifetime warranty.

Other useful features:

Safety rated CAT III 1000 V, CAT IV 600 V
Comes with a lifetime warranty
Allows closed-case calibration through front panel
Includes ergonomic case with integrated protective holster

Slotted screwdrivers

Three different bladeforms
Three handle lengths

Phillips screwdrivers

#1 and #2 tips
Two handle lengths

Long nose pliers with side cutter and gripping zones

Unique milled wave pattern gripping zones
4 gripping points for pulling round objects with superior grip that won't slip
Straight, half-round, long and slim knurled jaws, specially profiled
Side cutting edge for wire cutting

Heavy duty, high leverage diagonal cutter

Cuts hard materials including steel and piano wire
Power joint and precision cutting edges

Heavy Duty Combination Pliers

Secure hold by aggressive serrated jaws and 4-point gripping hole
Slim shape for better access to wires in tight spaces
Powerful gripping jaw, yet 20% lighter weight than other designs

Specifications: Fluke 179 True-RMS Digital Multimeter plus insulated hand tools starter kit

Fluke 179 True-RMS Digital Multimeter Specifications
Voltage DC	Accuracy¹	±(0.09% + 2)
	Max. resolution	0.1 mV
	Maximum	1000 V
Voltage AC	Accuracy¹	±(1.0% + 3)
	Max. resolution	0.1 mV
	Maximum	1000 V
Current DC	Accuracy¹	±(1.0% + 3)
	Max. resolution	0.01 mA
	Maximum	10 A
Current AC	Accuracy¹	±(1.5% + 3)
	Max. resolution	0.01 mA
	Maximum	10 A
Resistance	Accuracy¹	±(0.9% + 1)
	Max. resolution	0.1 Ω
	Maximum	50 MΩ
Capacitance	Accuracy¹	±(1.2% + 2)
	Max. resolution	1 nF
	Maximum	10,000 µF
Frequency	Accuracy¹	±(0.1% + 1)
	Max. resolution	0.01 Hz
	Maximum	100 kHz
Temperature	Accuracy¹	±(1.0% + 10)
	Max. resolution	0.1°C
	Range	-40°C / 400°C
1. Accuracies are best accuracies for each function
Environmental Specifications
Operating temperature	-10°C to +50°C
Storage temperature	-30°C to +60°C
Humidity (without condensation)	0% – 90% (0°C – 35°C) 0% – 70% (35°C – 50°C)
Safety Specifications
Overvoltage category	EN 61010–1 to 1000 V CAT III EN 61010–1 to 600 V CAT IV
Agency approvals	UL, CSA, TÜV listed and VDE Pending
Mechanical and General Specifications
Size	43 x 90 x 185 mm
Weight	420 g
Warranty	Lifetime
Battery life	Alkaline ~200 hours typical, without backlight

Screwdriver Type	Blade length (inches mm)	Handle length (inches mm)	Handle width (inches mm)	Bladeform diameter (inches mm)
Slot	3 75	3-3/8 86	1 25	3/32 2.55
Slot	4 100	3-11/16 94	1 5/16 30	5/32 4.0
Slot	5 125	4-3/16 106	1 7/16 36	1/4 6.0
Phillips #1	3 80	3-11/16 94	1 3/16 30	7/32 5
Phillips #2	4 100	4-3/16 106	1 7/16 36	1/4 6

Pliers Type	Nominal Length (inches)	Nominal Length (mm)
Long Nose	8	200
Diagonal Cutters	8	200
Lineman Combination Pliers	8	200

Warranty

Fluke Insulated Hand Tool Lifetime Limited Warranty

Each Fluke Insulated Hand Tool will be free from defects in material and workmanship for its lifetime. As used herein, “lifetime” is defined as seven years after Fluke discontinues manufacturing the product, but the warranty period shall be at least fifteen years from the date of purchase. This warranty does not cover damage from neglect, misuse, contamination, alteration, accident or abnormal conditions of operation or handling, damage or normal wear and tear of mechanical components. This warranty covers the original purchaser only and is not transferable.

Recommendations for use and in-service care of Fluke Insulated Hand Tools

The following is guidance concerning the maintenance, inspection, retest and use of Fluke Insulated Hand Tools.

Warning – to avoid electrical shock or personal injury:

Keep fingers behind the finger guards of the tool. Never touch conductive parts.
Always wear approved eye protection.
Do not use in wet or damp locations. Do not use unless the tool is clean and dry.
Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage.

If the tool is used in a manner not specified, the protection may be impaired.

Storage

Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore, these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV- radiation.

Inspection before use

Before use, each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool, it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use.

Temperature

Insulated Hand Tools should be used only in environments having temperatures between –20 °C and +70 °C and, for tools marked “C”, between –40 °C and +70 °C.

Periodic examination and electrical retesting

An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination, the applicable dielectric test of IEC 60900 for insulated hand tools should be performed.

For details contact a Fluke Service Center.