Fluke 190-502/S ScopeMeter® Test Tool

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 50.11ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • Fluke 190-502/S ScopeMeter® Test Tool
  • Fluke 190-502/S ScopeMeter® Test Tool
  • Fluke 190-502/S ScopeMeter® Test Tool
  • Fluke 190-502/S ScopeMeter® Test Tool
  • Video Player is loading.
    Current Time 0:00
    Duration 0:00
    Loaded: 0%
    Stream Type LIVE
    Remaining Time 0:00
     
    1x
      • Chapters
      • descriptions off, selected
      • subtitles off, selected
      1. Fluke 190-502/S ScopeMeter® Test Tool
      2. Fluke 190-502/S ScopeMeter® Test Tool
      3. Fluke 190-502/S ScopeMeter® Test Tool
      4. Fluke 190-502/S ScopeMeter® Test Tool
      5. Fluke takes product testing seriously

      Key features

      Read more

      Product overview: Fluke 190-502/S ScopeMeter® Test Tool

      Fluke 190-502/S – 20 years of ScopeMeter® Test Tool Innovation

      As the first two-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, the Fluke ScopeMeter 190-502/S combines an unprecedented level of performance, ruggedness, and portability with 500 MHz bandwidth and real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances. This model features deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.

      Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

      The Fluke ScopeMeter 190-502/S portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000 V/CAT IV 600 V environments.

      Three-dimensional testing for industrial systems

      Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

      • Circuit voltage/current overloading
      • Signal timing measurements and synchronization issues
      • Attenuation/input impedance mismatch
      • Signal fluctuation/drift

      Three-phase testing for diagnosing VSD, power inverters, and converters

      • Test for harmonics, transients and loads at the three-phase power input
      • Troubleshoot DC to AC converters for faulty IGBT gates or filter circuits
      • Test PWM output for reflections and transients or voltage unbalance

      Safely measure from mV to kV

      Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

      Take on the harshest conditions with the only IP-51-rated Scope on the Market

      Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants ensuring reliable accurate performance every time you need them.

      Built in multimeter to quickly and conveniently perform precise measurements

      Built-in digital multimeter 2-channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include VDC, VAC, VAC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

      Work a Full Shift on a Single Charge

      New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.

      Capture and Share Waveforms Easily with New USB connectivity

      Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

      See a Stable Display Instantly with Connect-and-View&trade Triggering

      Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

      Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

      ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)

      • Stores events like motion profiles, UPS, power supply, and motor start-ups
      • With the Stop-on-Trigger mode, the ScopeMeter 190-502/S automatically recognizes a power failure and stores the waveform data preceding it
      • With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles

      Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults

      Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

      • Plotting minimum and maximum peak values and average over time up to 22 days
      • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults

      Tektronix THS3000 Handheld Oscilloscope

      The Tektronix THS3000 Handheld Oscilloscope has been discontinued, but customers can find a nearly identical replacement with the Fluke 190 ScopeMeter® Test Tool.

      See how the models compare:

       THS3000Fluke 190 ScopeMeterFeature / Capability Differences
      PlatformThe Tektronix THS 3000 and Fluke 190 ScopeMeter Test Tool share the same electronics, with some feature differences highlighted below
      Sampling size2.5 GS/s max real time sampling rate; 5 GS/s max sequential sampling rate2.5 GS/s max real time sampling rateReal time sampling rate to capture all the details for troubleshooting electronic circuits
      Safety ratingCAT IIICAT IVFluke 190 Series II covers all application installations from CAT II to CATIV
      IP rating according to IEC529IP 41IP 51Fluke 190 Series with IP51 rating is less susceptible to harm caused by environmental conditions no matter where it is used in a lab or the field
      SoftwareOpenChoiceFlukeView®FlukeView® makes it easy to extract, analyze and document waveforms
      Probe sizeLab sizeIndustrial sizeOptional Fluke VPS-510-x Probes offer same size and performance as standard lab grade scope probe

      Specifications: Fluke 190-502/S ScopeMeter® Test Tool

      Specifications
      Bandwidth500 MHz
      Number of channels500 MHz: 2 channels
      Real-time sample rate5 GS/s
      Inputs2 scope plus DMM input
      Independently floating isolated inputsUp to 1000 V CAT III/600 V CAT IV between inputs, references and ground
      Input sensitivity2 mV-100 V/div
      Trigger typesConnect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
      Trigger sourceAny scope input channel, or external via DMM input
      Glitch capture8 ns
      Scope measurementsCursor: 7
      Automatic: 30
      Maximum record lengthScopeRecord mode: 30,000 pts
      Scope mode: 10,000 pts per input
      PersistenceDigital persistence giving analog oscilloscope-like waveform decay
      Waveform compareWaveform reference with automatic Pass/Fail testing
      DMM Specification
      Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)4 mm banana inputs, fully isolated from scope inputs and from scope ground
      Maximum resolution5000 counts
      MeasurementsVDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
      MemoryScreen + Setup: 30
      Recording: 10
      Display153 mm full color LCD with fast update rate
      Environmental Specifications
      Operating temperature0°C to 40°C Including Batteries
      0°C to 50°C Excluding Batteries
      Storage temperature-20°C to +60°C
      Operating altitudeUp to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
      Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
      Safety Specifications
      Electrical safety1,000V CAT III/600V CAT IV (EN61010-1)
      Mechanical and General Specifications
      Size270 x 190 x 70 mm
      Weight2.2 kg
      Warranty3-years on main instrument, 1-year on accessories
      Li-Ion batteryBP290 2400 mAh battery up to 4 Hours included standard
      Included Accessories
       VPS410 Voltage Probe Sets (one red, one blue)
      TL175 TwistGuard™ safety designed Test Lead Set (red and black)
      BC190 Battery Charger/mains Adapter
      BP290 2400 mAh Li-ion Battery
      Handstrap (affixed to instrument)
      Hangstrap
      Multi-Language User Manuals on CD-Rom
      FlukeView ScopeMeter® demo package (restricted functionality)
      USB Interface Cable
      WarrantyThree years on main instrument, one year on accessories

      Models: Fluke 190-502/S ScopeMeter® Test Tool

      Fluke 190-502/S
      Fluke 190-502/S ScopeMeter® Test Tool

      Buy it

      Includes:

      • Color ScopeMeter® 500 MHz
      • 2 channels
      • DMM/Ext.input
      • C290 Hard-shell Carrying Case
      • SW90W FlukeView for ScopeMeter Test Tool
      • Windows® software
      • bvseo_sdk, p_sdk, 3.2.1
      • CLOUD, getContent, 59.11ms
      • QUESTIONS, PRODUCT
      • bvseo-msg: HTTP status code of 404 was returned;
      • bvseo_sdk, p_sdk, 3.2.1
      • CLOUD, getReviews, 21.72ms
      • REVIEWS, PRODUCT
      • bvseo-msg: HTTP status code of 404 was returned;
      Please enable cookies to view product reviews.

      Manuals + resources: Fluke 190-502/S ScopeMeter® Test Tool